Toshiba 40UX600U User Manual - Page 67

Chapter 8: Advanced features Wireless Information The settings configured in Wireless Setup can be confirmed. 1 Press QUICK to open the Quick menu. 2 Press B or b to select Wireless Information and press . OK 3 When the AP connection succeeds, a Wireless Information window will appear. Note: Press the RED button if you confirm the situation of surrounding APs. Item Description Status Connected is displayed when the TV is connecting with the AP. Disconnected is displayed when the TV is disconnecting with the AP. Signal Connection signal strength with AP (STRONG/MEDIUM/WEAK) Speed The link speed with AP Mode Working mode (11a, 11b, 11g, 11n) Channel A channel in use (1-165) Network Name SSID set Authentication Authentication set Encryption Encryption set Security Key Security Key set AP MAC Address The AP's MAC address is displayed when the TV is connecting with AP. USB MAC Address The MAC address of USB (Dual Band WLAN Adapter) is displayed. DHCP Enabled is displayed when you use DHCP. Disabled is displayed when you do not use DHCP. IP Address The TV's IP address Subnet Mask Value of the Subnet Mask Default Gateway Address of the Default GATEWAY DNS Address of the DNS Note: Even if AP for IEEE 802.11n is used when Encryption is set to WEP or TKIP, the Speed value might be low. Encryption is recommended to be changed to AES (- left-hand column). Advanced Network Setup Note: • When the DHCP function of the router connected with this TV is On, you can set Auto Setup to On or Off. (Usually set it to On.) • When the DHCP function of the router is Off, set Auto Setup to Off, and manually set IP Address or DNS Address. IP Address Setup Auto Setup: 1 From the PREFERENCES menu, highlight Network Setup and press . OK 2 Press B or b to highlight Advanced Network Setup, and press . OK 3 Press B or b to highlight IP Address Setup, and press . OK 4 Highlight Auto Setup, and then press C or c to select On. Note: Other items will be grayed out when Auto Setup is set to On. Manual Setup: 1 From the PREFERENCES menu, highlight Network Setup and press . OK 2 Press B or b to highlight Advanced Network Setup, and press . OK 3 Press B or b to highlight IP Address Setup, and press . OK 4 Highlight Auto Setup, and then press C or c to select Off. 5 Press B or b to highlight IP Address. 6 Press C or c to highlight the field you want to change, and then use the number buttons to input the IP address. To save the setting, press . OK Note: • IP address field numbers must be between 0 and 255. If you input an incompatible number and press OK , the field number will reset to the previous value. 7 Press B or b to highlight Subnet Mask, and edit in the same way as IP Address. 8 Press B or b to highlight Default Gateway, and edit in a way same as IP Address. Note: If you manually set the IP address, you must not use the same IP address for any other device. The IP address you use should be a private address. If you do not know the correct values to use, please contact your network administrator or internet service provider. 67