Toshiba 40UX600U User Manual - Page 70

Chapter 8: Advanced features Setting up the Media Renderer feature Term meaning: DMS: DLNA CERTIFIED™ Server DMR: DLNA CERTIFIED™ Renderer DMC: DLNA CERTIFIED™ Controller The TV can be configured as a DMR. When operating as a DMR, the TV is displaying content provided by a DMS. The selection of the media is done by the DMC - the TV does not select the input. The TV can play photo, movie, or audio files when operating as a DMR. Installation You can configure the DMR settings individually, or use Installation mode to be prompted for each setting in order. 1 From the PREFERENCES menu, highlight Media Renderer Setup and press . OK 2 Press B or b to highlight Installation, and press OK . 3 Press C or c to select On, and press . OK 4 If you want to change the device name as a Renderer, highlight the Device Name field and press OK . The Software Keyboard window will appear. 5 Input the Device Name by using the Software Keyboard (- page 69). To save your setting, press the BLUE button. Note: The Device Name can be up to 127 characters long. 6 Highlight Done, and then press . OK 7 If you want to change the password, press C or c to select Yes, and then press . OK 8 Change the password by using the Software Keyboard (- page 69), and then press the BLUE button. Note: The Web Password can be up to 15 characters long. 9 Highlight Done, and then press . OK 10 If you want to limit access from unexpected DMCs, press C or c to select On, and then press . OK 11 If you want to proceed with registration of DMCs, press C or c to select Yes, and then press . OK 12 Press B or b to highlight the item you want to accept, and press OK . A check will appear in the box. To remove the check, press OK again. 13 Press c to highlight Done, and then press . OK 70 14 The Maximum Volume Setup window appear. Press C or c to adjust to the desired volume. Then, press . OK Media Renderer 1 From the PREFERENCES menu, highlight Media Renderer Setup and press . OK 2 Press B or b to highlight Media Renderer, and then press C or c to select On or Off. Device Name Setup The device name as a DMR can be changed. The set device name can be confirmed from the DMC. 1 From the PREFERENCES menu, highlight Media Renderer Setup and press . OK 2 Press B or b to highlight Device Name Setup, and press . OK 3 Highlight the Device Name field and press OK . The Software Keyboard window will appear. 4 Input the Device Name by using the Software Keyboard (- page 69). To save your setting, press the BLUE button. Note: The Device Name can be up to 127 characters long. 5 Highlight Done, and then press . OK Web Password Setup This setup sets a necessary password for the DMC's accessing a built-in Web page of a DMR. 1 From the PREFERENCES menu, highlight Media Renderer Setup and press . OK 2 Press B or b to highlight Web Password Setup, and press . OK 3 Highlight the Password field and press OK . The Software Keyboard window will appear. 4 Change the password by using the Software Keyboard (- page 69), and then press the BLUE button. Note: • The Web Password can be up to 15 characters long. • Only the password can be changed. User ID cannot be changed. 5 Highlight Done, and then press . OK Note: • Some DMC can view or modify the device name of the DMR. • Depending on the TV's state, the device name may not be able to set from Web page. • Confirm the DMCs instruction manual for the way of accessing Web pages.