Toshiba 46SL417U User Manual - Page 80

Chapter 10: Appendix Searching for a device code If you do not know the device code for a particular device, you can view each available code for that device mode and sample the functions to find the code that operates the target device. 1 Press a mode select button on the remote. 2 While holding down Q, press 8, 5, 0, 0. The remote control enters program mode. 3 Point the remote at the target device. Press , POWER 1, , VOL CH , or , and then press B or b to change a code. 4 If the device responds to the remote control: Press Q to store the device code. The remote exits program mode. 5 If the device does not respond to the remote control: Repeat this step until the device responds to the remote. When no code is found, exit the program mode by the following operation: •Press Q. (current state is stored) •Press no key for 10 seconds. (current state is not stored) Note: When a search cycle is completed, the remote displays each available code again. If no key is pressed within 10 seconds, the remote exits program mode and returns to the previous code. Locking the volume keys The remote's volume keys ( VOL , VOL , and MUTE) are locked to a device mode. State Meaning The remote operates the TV's volume Locked (default) except the AUX mode, even when the TV is not the current device mode. Unlocked The remote operates the volume of the device associated with the current device mode. Each device mode has its own volume (if the device ID has volume data). Locked to a specific device mode The remote operates the volume of the device associated with the locked mode, even when the locked mode is not the current device mode. Note: The AUX mode is not locked to other device modes. See "Operating other devices" (- p. 79). To lock the remote's volume keys to a specific mode: Example: CABLE/SAT mode 1 Press CABLE/SAT. 2 While holding down Q, press 8, 0, 0, 0. 3 Press VOL (locked). The remote's volume keys now operate the volume of the device associated with the CABLE/SAT mode, even when CABLE/SAT is not the current device mode. To unlock the remote's volume keys: 1 While holding down Q, press 8, 0, 0, 0. 2 Press VOL . The CABLE/SAT mode is unlocked. Clearing the remote's programming You can clear all programmed remote control features not related to "Device code setup" and reset the volume lock to the TV device mode. While holding down Q, press 8, 9, 0, 0. Resetting to the factory default You can clear changed manufacturing features. While holding down Q, press 8, 9, 0, 1. 80