Toshiba P100 User Guide - Page 20
Inserting and removing an SD™ Card (optional), Protecting data on an SD™ Card - memory
View all Toshiba P100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
20 Getting Started Inserting and removing an SD™ Card (optional) Inserting and removing an SD™ Card (optional) NOTE An SD™ Card must be purchased separately. Your camcorder comes with internal memory that allows you to store photos and videos. You can expand the memory capacity by using an optional SD/SDHC/SDXC memory card. 1 Open the SD™ Card cover. 2 Insert the SD™ Card into the slot until it locks into place, as shown below. To remove the SD™ Card, press inward to release it. When the card pops out, grasp it and pull it straight out. (Sample Illustration) Inserting and removing an SD™ Card NOTE When a memory card is inserted, videos and photos are saved to the card rather than the built-in memory. Protecting data on an SD™ Card Photos or videos cannot be recorded on an SD™ Card when the card is locked (read only), however photos and videos can be viewed. Make sure the lock is in the writeable position before recording photos and videos as shown below. Writeable Write-protected position position (Sample Illustration) Protecting data on an SD™ Card