Toshiba Satellite Pro 6000 User Guide - Page 175
Connecting the display device, To connect a device to the television jack, you need a video cable
View all Toshiba Satellite Pro 6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
175 Expansion Options Using an external monitor ❖ A video display device, such as a video projection unit, via the television jack. ❖ An external SVGA monitor via the video-out port. Before connecting your television, video projector, monitor or other display device, configure your computer for the type of device you're connecting. To do this, refer to your operating system documentation. Connecting the display device If you're connecting a television or other video display device to the computer's television jack, refer to the following section for guidelines on choosing a video cable, then refer to "Connecting a device to the television jack" on page 175. If you're connecting an SVGA monitor, skip to "Connecting an external monitor" on page 176. Selecting video cables To connect a device to the television jack, you need a video cable (not included with your system). For the best video quality, always use a properly shielded cable. HINT: Toshiba recommends using a cable no longer than 20 feet (approximately 6 meters). Using a poor quality cable may result in a dull or fuzzy picture, poor color, ghosting, video noise, or loss of video. Connecting a device to the television jack 1 Connect one end of the video cable to the external video device.