Toshiba Satellite Pro L450-EZ1510 User Manual - Page 65
spindle and flush with the spindle base.
![]() |
View all Toshiba Satellite Pro L450-EZ1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
3. Lay the CD/DVD, label side up, in the disc tray. L450/L450D Figure 4-4 Inserting a CD/DVD When the disc tray is fully opened, the edge of the computer will extend slightly over the area where you insert the media. Therefore, when loading a CD or DVD, you will need to turn it slightly at an angle when you place it in the disc tray. After loading the CD/DVD you should ensure that it is properly positioned over the central spindle and that it lies flat within the tray. ■ Do not touch either the laser lens or the area immediately around it doing so could cause misalignment and may damage the drive. ■ Make sure that no foreign objects are inserted into or otherwise enter the drive. Check the disc tray, especially the area behind the front edge, to ensure that there are no foreign objects or material present before closing the drive. 4. Press the center of the CD/DVD gently until you feel it click into place on the center spindle. The disc should be slightly below the top of the spindle and flush with the spindle base. 5. Press the center of the disc tray in order to close it - the tray will click into place when it is locked. If the CD/DVD is not seated properly when the disc tray is closed, you may find that the media itself might become damaged, and/or the disc tray might not open fully when you next press the eject button. User's Manual 4-3
![](/manual_guide/products/toshiba-psly1u00f008-user-manual-ebb0946/65.png)