Toshiba Tecra A3-S711 Maintenance Manual - Page 144
Speakers, Removing the Speakers, Installing the Speakers
View all Toshiba Tecra A3-S711 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
4 Replacement Procedures 4.15 Speakers Removing the Speakers To remove the speakers, first remove the top cover, then follow the steps below: Figure 4-28 Removing the speakers 1. Remove two black M2.5x3 screws securing each speaker into place. 2. Lift out the speakers. Installing the Speakers To install the speakers, follow the steps below and refer to the figure in the preceding section: 1. Seat each speaker. The speaker cases are marked with L (left) and R (right). 2. Secure each speaker with two black M2.5x3 screws. 3. Attached the left and right speaker cables to the system board. 4-32 Tecra A3/S2 Series Maintenance Manual
4
Replacement Procedures
4-32
Tecra A3/S2 Series Maintenance Manual
4.15 Speakers
Removing the Speakers
To remove the speakers, first remove the top cover, then follow the steps below:
Figure 4-28
Removing the speakers
1.
Remove two black M2.5x3 screws securing each speaker into place.
2.
Lift out the speakers.
Installing the Speakers
To install the speakers, follow the steps below and refer to the figure in the preceding section:
1.
Seat each speaker.
The speaker cases are marked with L (left) and R (right).
2.
Secure each speaker with two black M2.5x3
screws.
3.
Attached the left and right speaker cables to the system board.