Toshiba Tecra A3-S711 Maintenance Manual - Page 149
Fan, Heat Sink, & CPU, Installing the Direct Play Button Board, Removing the Fan
View all Toshiba Tecra A3-S711 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
4 Replacement Procedures Installing the Direct Play Button Board To install the Direct Play Button board, follow the steps below and refer to the figures in the preceding section. 1. Secure two M2.5x 3 screws and FFC from top cover. 4.18 Fan, Heat Sink, & CPU Removing the Fan, Heat Sink & CPU To remove the Fan, Heat Sink, and CPU, you must first remove the keyboard, top to reveal the system board, then follow the steps below: CAUTION: If you remove the heat sink, you should use the CPU grease tool to remove the grease on the CPU and heat sink. 1. On the topside of the system board, remove three M2.5x5 screws securing the fan module. 2. Remove the fan connectors from the system board. 3. Lift off the fan module. Tecra A3/S2 Series Maintenance Manual 4-37