Toshiba Tecra A3-S711 Maintenance Manual - Page 19
System Unit, Support 64MB/128MB VGA memory for NV43M/M24P/M22P.
View all Toshiba Tecra A3-S711 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
1 Hardware Overview 1.2 System Unit 1.2 System Unit The system unit is composed of the following major components: ? Processor ? Intel Celeron M CPU up to 1.5GHz 0.09u, 1M L2, FSB 400MHz ? Intel Pentium M CPU up to 2.13GHz 0.09u, 2M L2, FSB 533MHz ? Micro FC-PGA package CPU ? System Logic ? Intel 915PM (Alviso-PM)/ Intel 915GM (Alviso-GM) (400/533 MHz FSB supported) ? ICH6-M ? ENE KB910 for Keyboard Controller, Battery management Unit, and RTC. ? TI PCI7411 for Card Bus PCMCIA, 1394, 5 in 1 controller. ? Integrated VGA solution for 915GM/ External VGA card for 915PM ? ALC250DV for AC97 Codec ? Marvell 88SA8040 for SATA to PATA HDD support ? Marvell 88E8053 for GIGA LAN/ Marvell 88E8036 for 10/100M LAN ? Memory ? On board with two 200-pin +2.5V SO-DIMM connector, supporting, DDR memories card. Maximum up gradable to 2GB by two 1GB SO-DIMM module. ? 1MB/2MB L2 Cache on CPU ? Support 64MB/128MB VGA memory for NV43M/M24P/M22P. ? Adjustable 128MB UMA VGA memory share from North Bridge. ? Fixed Disk Interface ? Marvell 88SA8040 supports PATA HDD. ? Video Subsystem ? UMA VGA Memory up to 128MB ? Display Core Frequency of 200/250/266/333MHZ ? 3D Graphics Engine ? Analog Display support ? Digital Video out port (DVOB and DVOC)support ? DVOB With 165-MHZ clot clock support for 12 bit interface. ? Dedicated 2FP (local flat panel) interface ? Single or dual channel LVDS panel support up to SXGA+ panel, resolution with frequency range from 25MHZ to 112MHZ per channel. ? SMsC LPC 47N217 Super I/O with LPC Interface ? PC99a, PC2001 ? ACPI 2.0 Compliant ? Serial Ports ? One Full Function Serial Port 1-10 Tecra A3/S2 Series Maintenance Manual