Toshiba Tecra A3-S711 Maintenance Manual - Page 22
Marvell 88E8053 for Giga LAN, Marvell 88E8036 for 10/100M LAN, Marvell 88SA8040 for Serial ATA
View all Toshiba Tecra A3-S711 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
1.2 System Unit 1 Hardware Overview Marvell 88E8053 for Giga LAN ? PCI Express base specification 1.0a compliant ? x1 PCI Express interface with 2.5 GHz signaling ? Advanced error reporting ? Message signaled interrupts ? Configurable 48 KB deep buffer ? On-chip VLAN insertion and removal ? TCP, IP, UDP Checksum offload ? Compliant to 802.3x flow control support ? 10/100/1000 IEEE 802.3 compliant ? Automatic MDI/MDIX crossover at all speeds ? Wake On LAN(WOL) power management support ? Compliant to ACPI 2.0 specification ? Smart power down when link is not detected ? Marvell Virtual Cable Tester(VCT) for advanced cable diagnostics Marvell 88E8036 for 10/100M LAN ? PCI Express base specification 1.0a compliant ? x1 PCI Express interface with 2.5GHz signaling ? Active state power management (L0s) support ? Advanced error reporting ? Configurable 4KB deep buffer ? Message signaled interrupts ? Compliant to 802.3x flow control support ? 10/100 IEEE 802.3 compliant ? Wake On LAN(WOL) power management support ? Compliant to ACPI 2.0 specification ? Smart power down when link is not detected ? Power regulator outputs for 2.5V and 1.2V supplies Marvell 88SA8040 for Serial ATA Bridge ? ATA/ATAPI PIO mode data transfer ? ATA/ATAPI Ultra DMA(UDMA) data transfer rates of 16.7, 25, 33, 44, 66, 100, 133 and 150MB/s ? Serial ATA power save modes ? Serial ATA hot-plug ? Enhanced receiving FIFO flow control for Serial ATA link ? DMA Command Queuing(maximum 32 entries ? Supports 20, 25, 30, or 40MHz reference clock. ? Serial ATA Interface of 1.5Gbps ? Full scan for high production test coverage Tecra A3/S2 Series Maintenance Manual 1-13