Vaddio RoboSHOT 12 HDMI User Guide - Page 33
Screen Shot, Admin Menu - Camera Settings
View all Vaddio RoboSHOT 12 HDMI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
RoboSHOT HD Cameras Screen Shot: Admin Menu - Camera Settings The Global Camera Settings, CCU Scenes, Color Settings and Custom Scene Labels are accessible from this menu. ➊➋ ➌ ➍ ➎ ➏ 1) Load Preset at Startup: Check this box to move the camera to a predefined preset location when the camera powers up. Use the pull down menu to select the Preset 1 through 12 to be loaded when this box is checked. 2) Load CCU Scene at Startup: Check this box to load a CCU Scene into the camera when the camera powers up. The pull down menu will allow the selection of one of the 6-factory scenes, or one of the 3 custom scenes. 3) CCU Scenes: Click on any of these 9 buttons to load one of the CCU scenes into the camera. These Scenes can be fine-tuned if changes are needed, and stored into any of the three User defined scenes. 4) Color Settings: When painting or shading camera scenes for specific lighting situations or environments, these parameters can be adjusted for matching cameras in the same area. The parameters within the Color Settings section are defined below (top to bottom): Auto Iris Check Box: When checked, the camera will operate in Auto Iris mode, when unchecked, the camera will be in Manual Iris mode and allow adjustment of Iris and Iris Gain levels. Iris: Move adjustment slider as required to adjust the iris opening. A numeric value will be displayed in the box to the right of the slider. RoboSHOT HD Cameras - Document Number 342-0793 Page 33 of 60