ViewSonic PJ1172 PJ1172 User Guide, English - Page 29
PICTURE-2 Menu
UPC - 766907095111
View all ViewSonic PJ1172 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
PICTURE-2 Menu With the PICTURE-2 menu, the items shown in the table below can be performed. Perform each operation in accordance with the instruct ions in the table below. memo This menu cannot be selected at a M1-D signal. Item V POSITION H POSITION H PHASE H SIZE OVER SCAN RESET Description Adjust the vertical position using the S/T buttons.: Up Down memo This item can be selected only at a RGB signal. Adjust the horizontal position using the S/T buttons.: Left Right memo This item can be selected only at a RGB signal. Adjust the horizontal phase to eliminate flicker using the S/T buttons.: Right Left memo This item can be selected only at a RGB signal or a component video signal other than a COMPONENT port input of 525i/625i/ SCART RGB. Adjust the horizontal size using the S/T buttons.: Large Small memo This item can be selected only at a RGB signal. memo When this adjustment is excessive, the picture may not be displayed correctly. In such a case, please reset the adjustment pressing the RESET button during this operation. Adjust the over-scan ratio using the S/T buttons.: Large Small memo This item can be selected only at a video signal. memo When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case, please adjust small. Select EXECUTE using the S button to reset PICTURE-2 menu items.: EXECUTE CANCEL The items of the PICTURE-2 menu are collectively returned to the initial setting. Note that the item "H PHASE" is not reset. ViewSonic PJ1172 24