ViewSonic PJD5123 PJD5123 User Guide (English) - Page 45

Troubleshooting, Start-up problems, Image problems

Get ViewSonic PJD5123 PDF manuals and user guides
UPC - 766907526516
View all ViewSonic PJD5123 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Troubleshooting Refer to the symptoms and measures listed below before sending the projector for repairs. If the problem persists, contact your local reseller or service center. Please refer to "LED Indicator Messages" as well. Start-up problems If no lights turn on:  Be sure that the power cord is securely connected to the projector and the other end is plugged into an outlet with power.  Press the power button again.  Unplug the power cord and wait for a short while, then plug it in and press the power button again. Image problems If the searching source is displayed:  Press SOURCE on the projector or Source on the remote control to select an active input source.  Be sure the external source is turned on and connected.  For a computer connection, ensure your notebook computer's external video port is turned on. Refer to the computer manual. If the image is out of focus:  While displaying the on-screen menu, adjust the focus ring. (The image size should not change; if it does, you are adjusting the zoom, not the focus.)  Check the projection lens to see if it needs cleaning. If the image is flickering or unstable for a computer connection:  Press MENU on the projector or Menu on the remote control, go to Video/Audio and adjust Frequency or Tracking. Remote control problems If the remote control does not operate:  Be sure nothing is blocking the remote control receiver on the front of the projector. Use the remote control within the effective range.  Aim the remote control at the screen or at the front of the projector.  Move the remote control so it is more directly in front of the projector and not as far to the side. EN-40 40

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
40
Troubleshooting
Refer to the symptoms and measures listed below before sending the projector for
repairs. If the problem persists, contact your local reseller or service center. Please
refer to "LED Indicator Messages" as well.
Start-up problems
If no lights turn on:
Be sure that the power cord is securely connected to the projector and the other end
is plugged into an outlet with power.
Press the power button again.
Unplug the power cord and wait for a short while, then plug it in and press the power
button again.
Image problems
If the searching source is displayed:
Press
SOURCE
on the projector or
Source
on the remote control
to select an
active input source.
Be sure the external source is turned on and connected.
For a computer connection, ensure your notebook computer’s external video port is
turned on. Refer to the computer manual.
If the image is out of focus:
While displaying the on-screen menu, adjust the focus ring. (The image size should
not change; if it does, you are adjusting the zoom, not the focus.)
Check the projection lens to see if it needs cleaning.
If the image is flickering or unstable for a computer connection:
Press
MENU
on the projector or
Menu
on the remote control
, go to
Video/Audio
and adjust
Frequency
or
Tracking
.
Remote control problems
If the remote control does not operate:
Be sure nothing is blocking the remote control receiver on the front of the
projector. Use the remote control within the effective range.
Aim the remote control at the screen or at the front of the projector.
Move the remote control so it is more directly in front of the projector and
not as far
to the side.