Vonage IP8100-1 Features Guide - Page 8

Getting Started Setup 4. Do not dispose of the battery pack into household garbage. Please refer to the information concerning proper battery recycling. 5. Do not charge the battery pack with other electrical devices. Reset Switch The reset switch, when quickly pressed and released, will reset the phone and restart the software. Beware that when the reset switch is pressed and held for more than 10 seconds and then released, the phone will restore to factory defaults. This includes clearing and resetting the password on the web configuration. Reset switch does not affect your base unit power, RF operation, or any of the telephone handset settings. Checking for dial tone After the battery is charged, press ON on the handset. The LCD displays PHONE and shows a call timer, and you will hear a dial tone. If not, see In Case of Difficulty. CAUTION: Use only the VTech power supply provided with your telephone. IMPORTANT! MAXIMUM PERFORMANCE OF YOUR CORDLESS TELEPHONE SYSTEM: 1. Install your base unit and extension handsets away from electronic equipment, such as personal computers, television sets and microwave ovens. 2. In locations where there are multiple cordless telephones, separate the base units as far away as possible. 3. Install your telephone equipment away from heat sources and sunlight. 4. Avoid excessive moisture, dust or extreme cold. Add new handsets to make your phone more versatile Your telephone can accommodate up to four cordless handsets. You can add new handsets (Model IP811, sold separately) at any time. You can register a maximum of four handsets.