Vtech KidiZoom Action Cam HD User Manual - Page 28

To Attach the Floating Handle 1. To mount the waterproof case onto the Floating Handle, align the tripod screw hole on the waterproof case to the screw of the Floating Handle. Screw the knob on the floating mount clockwise to affix the camera on the mount. 2. Loosen the angle adjustment handle and you can rotate the angle adjustment arm to adjust the capture angle. 3. Tighten the angle adjustment handle after you set the capture angle. Notes on Use • This waterproof case is operable up to a water depth of 6' (2 meters) for 30 minutes with the camera inserted. • The waterproof performance is in accordance with the current toy safety standards. • Do not subject this unit to a jet of pressurized water. • Do not use this unit in hot springs. • Use this unit in the recommended operation water temperature range of 32°F to 104°F (0°C to 40°C). Otherwise, moisture, condensation or water leakage may occur and damage the camera. • Sometimes waterproof performance is lost if this unit is subject to a strong impact such as from being dropped. • Do not throw this unit into the water. • Do not leave this unit under direct sunlight or in a very hot and humid place for a long period of time. If you cannot avoid leaving this unit under direct sunlight, be sure to cover it with a towel or other protection. • When the camera overheats, it may automatically turn off or recording may malfunction. To use the camera again, leave it in a cool place until it returns to room temperature. • Thoroughly wash off any sunscreen that may get on the waterproof case with warm water. • After using in salt water, clean the waterproof case in fresh, warm water. 28 2288