Vtech KidiZoom Action Cam HD User Manual - Page 9

GETTING STARTED When you use the Kidizoom® Action Cam HD camera for the first time, switch the Master Power Switch to On. Locate the Master Power Switch on the bottom of the camera and move it to the 1 position . When the Master Power Switch is Off, it will not be possible to charge the camera or play any activities. BATTERY CHARGING Note: Adult operation required. • Make sure the Master Power Switch is turned On before charging. • Pull up the rubber cover over the Micro-USB Port on the side of camera. • Insert the micro-USB cable (small end) into the Micro-USB Port on the camera. • Insert the large end of the micro-USB cable into a USB port on a computer or wall plug. A USB port is usually marked with this symbol: • Once the connection is successful, you will see the battery charging screen. • When the battery is fully charged, a message will appear on the screen briefly, then the screen will turn off. Disconnect the camera from the power source. Note: It will take approximately three hours to fully charge the battery. The actual charging time depends on the charging current, the remaining charge and the ambient temperature of the charging environment. The optimal ambient temperature is 32°F to 104°F (0°C to 40°C). 9 99