Vtech KidiZoom Action Cam HD User Manual - Page 34
approximately 50% of the ultimate strength will be achieved
View all Vtech KidiZoom Action Cam HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Note: Maintain this pressure for several minutes to improve the adhesive bond strength. 5. We recommend that the adhesive flat mount stay on the surface at room temperature for one day before using to allow the ultimate strength to be achieved. At room temperature, approximately 50% of the ultimate strength will be achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours. 6. Mount the holder / waterproof case onto the adhesive mount. Align the tripod screw hole on the camera holder / waterproof case to the screw of the adhesive mount. Screw the knob on the adhesive mount clockwise to affix the camera to the mount. 7. Loosen the angle adjustment handle and you can rotate the angle adjustment arm to adjust the capture angle. 8. Tighten the angle adjustment handle after you set the capture angle. Note: Once the adhesive surface is affixed to a device, do not tear it off or the adhesive performance may be reduced and it may not work well in subsequent use. The mounting attachment can be detached from the adhesive mount. Push the detachable buckle as shown in the illustration to separate the two parts. 34 3344