Vtech KidiZoom Action Cam HD User Manual - Page 33
Caution, Using the Adhesive Mount
View all Vtech KidiZoom Action Cam HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
6. Mount the holder or waterproof case on the bike mount. Align the tripod screw hole on the camera holder or waterproof case to the screw of the bike mount. Screw the knob on the bike mount clockwise to connect the camera to the mount. 7. The camera is attached on the bike and ready for use. Loosen the angle adjustment handle and you can rotate the angle adjustment arm to adjust the capture angle. 8. Tighten the angle adjustment handle after you have set the capture angle. Caution: Do not adjust the mount while riding. Using the Adhesive Mount 1. Attach the adhesive flat mount to the mounting attachment as illustrated. You will hear a click when the attachment is seated correctly. 2. Ensure the surface to which you would like to affix the adhesive mount is clean and smooth. Note: If there is dirt or liquid on the surface or the surface is rough, the adhesive performance will be negatively affected. 3. Remove the protective cover of the adhesive and stick it on a clean, flat and smooth surface. Note: If the surface is not very flat or a bit curved, such as that of a helmet, add the extra two double-sided adhesive tape strips (included) onto the adhesive flat mount to improve the contact area between the surface and the adhesive flat mount. Remove the protective covers of the adhesive flat mount and the extra double-sided adhesive tape strips. Stick the two tape strips onto both tips of the adhesive surface of the adhesive flat mount. Next, affix the adhesive flat mount to the surface you have chosen. 4. Apply firm pressure to the adhesive flat mount and the contact surface and ensure that the surface makes contact over the entire area. 33 3333