Weider Pro 9600 English Manual - Page 10

15. Insert a 2" Square Inner Cap (28) into the end of the Butterfly Arm (10). Attach a Butterfly Handle (53) to the Butterfly Arm (10) with two 3/8" x 1" Bolts (84) and two 3/8" Flat Washers (48). Repeat this step with the other Butterfly Arm (10). 16. Lubricate a 3/8" x 3 1/4" Bolt (62). Attach the left Butterfly Arm (10) to the Left Pivot Arm (71) with the Bolt and a 3/8" Nylon Locknut (50). Repeat this step with the right Butterfly Arm (not shown) and the Right Pivot Arm (85). 15 10 53 16 48 48 84 10 53 48 28 48 28 50 10 85 71 62 Lubricate 17. Lubricate a 1/2" x 4" Bolt (68). Attach the Press 17 Frame (8) to the Press Base (6) with the Bolt and a 1/2" Nylon Jamnut (36). Note: Do not over tighten the 1/2" Nylon Jamnut (36); the Press Frame (8) must be able to pivot easily. 18. Insert a 2" Square Inner Cap (28) into the top of a 18 Press Arm (77). Press two 1" Round Inner Caps (86) into the outside ends of the handles. Attach the Press Arm (77) to the Press Frame (8) with two 5/16" x 2 3/4" Bolts (96) and two 5/16" Nylon Locknuts (64). Repeat this step with the other Press Arm (77). 8 68 6 36 Lubricate 28 Handles 86 64 96 77 8 10