Weider Pro 9600 English Manual - Page 17

43. Locate the Leg Press Cable (75). Attach the Leg Press Cable to the indicated side of the Press Upright (2) with a 3/8" x 3 1/4" Bolt (62) and a 3/8" Nylon Locknut (50). Do not tighten the Nylon Locknut yet. Wrap the Leg Press Cable (75) up around a 3 1/2" Pulley (24) in the direction shown. Attach the 3 1/2" Pulley and a Cable Trap (25) to the indicated side of the Press Frame (8) with a 3/8" x 4 3/4" Bolt (60) and a 3/8" Nylon Locknut (50). Do not tighten the Nylon Locknut yet. Be sure that the Cable Trap is turned to hold the Cable in place. 43 60 24 44. Wrap the Leg Press Cable (75) around a 3 1/2" 44 Pulley (24) in the direction shown. Attach the 3 1/2" Pulley and a Cable Trap (25) to the indicated side of the Press Seat Frame (7) with a 3/8" x 4 3/4" Bolt (60) and a 3/8" Nylon Locknut (50). Do not tighten the Nylon Locknut yet. Be sure that the Cable Trap is turned to hold the Cable in place. 62 7 2 75 25 60 24 75 50 8 7 25 50 45. Wrap the Leg Press Cable (75) around a 3 1/2" 45 Pulley (24) in the direction shown. Attach the 3 1/2" Pulley and a Cable Trap (25) to the indicated side of the Press Leg Lever (90) with a 3/8" x 4 3/4" Bolt (60) and a 3/8" Nylon Jamnut (63). Do not tighten the Nylon Locknut yet. Be sure that the Cable 60 24 Trap is turned to hold the Cable in place. 63 75 25 90 46. Wrap the Leg Press Cable (75) around a 3 1/2" 46 Pulley (24). Attach the 3 1/2" Pulley and a Cable Trap (25) to the indicated side of the Press Base (6) with a 3/8" x 5 1/2" Bolt (55) and a 3/8" Nylon Locknut (50). Do not tighten the Nylon Locknut yet. Be sure that the Cable Trap is turned to hold the Cable in place. Wrap the Leg Press Cable (75) around another 3 1/2" Pulley (24). Attach the 3 1/2" Pulley between the Small Pulley Plates (22) with a 3/8" x 1 3/4" Bolt (57) and a 3/8" Nylon Locknut (50) that was removed in step 40. Be sure the Leg Press Cable is routed so that it crosses from one side of the Press Base (6) to the other. 17 57 50 22 55 25 6 24 75 50