Weider Pro 9600 English Manual - Page 15
Wrap the Weight Cable 72 around a 3 1/2 Pulley
View all Weider Pro 9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
35. Wrap the Weight Cable (72) around a 3 1/2" Pulley (24). Attach the 3 1/2" Pulley and a Cable Trap (25) to the Butterfly Upright (1) with a 3/8" x 4" Bolt (59), a 3/8" Flat Washer (48), and a 3/8" Nylon Jamnut (63). Be sure that the Cable Trap is turned to hold the Cable in place. 36. Wrap the Weight Cable (72) around a 3 1/2" Pulley (24). Attach the 3 1/2" Pulley and a Cable Trap (25) between the lowest holes of the Adjustable Pulley Plates (23) hanging from the Butterfly Cable (73) with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut (50) that was removed in step 23. Be sure that the Cable Trap is turned to hold the Cable in place. 35 1 59 48 63 24 25 72 36 73 54 25 24 72 23 50 37. Wrap the Weight Cable (72) around a 3 1/2" Pulley 37 (24). Attach the 3 1/2" Pulley and a Cable Trap (25) to the bracket on the Butterfly Base (4) with a 3/8" x 1 3/4" Bolt (57) and a 3/8" Nylon Jamnut (63). Be sure that the Cable Trap is turned to hold the Cable in place. 24 25 57 38. Note: For convenience, the weights assembled 38 in step 9 are not shown in the following draw- ings. Wrap the Weight Cable (72) around a 3 1/2" Pulley (24). Attach the 3 1/2" Pulley and a Cable Trap (25) to the bracket on the Butterfly Base (4) with a 3/8" x 1 3/4" Bolt (57) and a 3/8" Nylon Jamnut (63). Be sure that the Cable Trap is turned to hold the Cable in place. 72 63 Bracket 4 72 25 24 57 63 Bracket 4 15