Weider Pro 9600 English Manual - Page 14
Lay the Weight Cable 72 under a 3 1/2 Pulley
View all Weider Pro 9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
31. Locate the Weight Cable (72). Note that one end 31 of the Weight Cable has a bolt, and the other end has a ball on it. Lay the Weight Cable (72) inside the bracket on the Butterfly Base (4) in the manner shown. Attach a 3 1/2" Pulley (24) to the bracket with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut (50). Be sure the Weight Cable is in the groove of the 3 1/2" Pulley. 3 24 54 4 72 50 Bracket 32. Wrap the Weight Cable (72) around a 3 1/2" Pulley 32 (24). Attach a 3/8" Flat Washer (48) and a 5/8" x 3 3/4" Bushing (66) to a 3/8" x 3 1/4" Bolt (62). Slide the Bolt through the Butterfly Front Leg (3) and the 3 1/2" Pulley. Secure another 5/8" x 3/4" Bushing and 3/8" Flat Washer to the Bolt with a 3/8" Nylon Locknut (50). 50 48 62 48 24 72 66 33. Insert the Weight Cable (72) through the hole in the Leg Lever (41), up around a 3 1/2" Pulley (24), back through the hole in the Leg Lever, and through the upper hole in the Butterfly Front Leg (3). Attach the 3 1/2" Pulley (24) and two 5/8" x 1/2" Bushings (99) to the Leg Lever (41) with a 3/8" x 2 3/4" Bolt (89), two 3/8" Flat Washers (48), and a 3/8" Nylon Locknut (50). 33 72 3 50 48 41 48 89 24 99 34. Lay the Weight Cable (72) under a 3 1/2" Pulley (24) as shown. Attach the 3 1/2" Pulley to the bracket on the Butterfly Base (4) with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut (50). 34 72 24 54 4 50 Bracket 14