Weider Pro 9600 English Manual - Page 18

47. Remove the 3/8" Nylon Locknut (50) from the indi- 47 cated 3/8" x 5 1/2" Bolt (55). Wrap the Leg Press Cable (75) around a 3 1/2" Pulley (24). Secure the 3 1/2" Pulley and a Cable Trap (25) to the 3/8" x 5 1/2" Bolt (55) on the indicated side of the Press Base (6) with the 3/8" Nylon Locknut (50). Be sure the Cable Trap is oriented to hold the Cable in place. Press a 2 1/2" Square Inner Cap (76) into the Press Base (6). 48. Remove the 3/8" Nylon Jamnut (63) from the indi- 48 cated 3/8" x 4 3/4" Bolt (60). Wrap the Leg Press Cable (75) around a 3 1/2" Pulley (24) in the direction shown. Secure the 3 1/2" Pulley and a Cable Trap (25) to the 3/8" x 4 3/4" Bolt (60) on the indicated side of the Press Leg Lever (90) with the 3/8" Nylon Jamnut (63). Be sure the Cable Trap is oriented to hold the Cable in place. 49. Remove the indicated 3/8" Nylon Locknuts (50). 49 Wrap the Leg Press Cable (75) around a 3 1/2" Pulley (24). Attach the 3 1/2" Pulley and a Cable Trap (25) to the 3/8" x 4 3/4" Bolt (60) on the indicated side of the Press Seat Frame (7) with the first 3/8" Nylon Locknut (50). Wrap the Leg Press Cable (75) around a 3 1/2" Pulley (24). Attach the 3 1/2" Pulley and a Cable Trap (25) to the 3/8" x 4 3/4" Bolt (60) on the indicated side of the Press Frame (8) with a 3/8" Nylon Locknut (50). Be sure the Cable Traps (25) are oriented to hold the Cable (75) in place. 50. Remove the indicated 3/8" Nylon Locknut (50). 50 Attach the Leg Press Cable (75) to the 3/8" x 3 1/4" Bolt (62) on the indicated side of the Press Upright (2) with the 3/8" Nylon Locknut (50). 76 24 55 6 25 75 50 60 90 75 25 24 63 7 60 25 24 25 50 24 75 8 2 62 50 75 18