Weider Pro 9600 English Manual - Page 22
Attaching The Ab Strap To The Ab Pulley
View all Weider Pro 9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
ATTACHING THE AB STRAP TO THE AB PULLEY STATION Attach the Ab Strap (81) to the Ab Cable (47) at the ab pulley station with a Cable Clip (69). ADJUSTING THE BACKREST To adjust a Backrest (12), loosen the Adjustment Knob (5) on the Press Upright (2) or the Butterfly Upright (not shown) by turning it counterclockwise and pulling it out as far as possible. Slide the Backrest forward or backward to the desired position, and snap the Adjustment Knob into a hole in the Backrest Frame (not shown). Secure the Backrest by turning the Adjustment Knob clockwise until tight. ADJUSTING THE CURL PAD Remove the Large Adjustment Knob (46) from the Butterfly Front Leg (3). Align the holes in the Butterfly Front Leg (3) with the desired set of holes in the Preacher Post (39). Reinsert the Large Adjustment Knob (46) through the holes in the Butterfly Front Leg and the holes in the Preacher Post. Turn the Large Adjustment Knob clockwise until tight. Note: When not using the Curl Pad (91), store it away from the weight system. 47 69 81 2 12 5 91 46 39 3 22