Weider Wedier Pro 9635 Canadian English Manual - Page 14

an M10 Washer 9, and an M10 Nylon

Get Weider Wedier Pro 9635 PDF manuals and user guides View all Weider Wedier Pro 9635 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

CABLE ASSEMBLY 25. Route the Low Cable (23) under a 90mm Pulley (15). Attach the Pulley and a Cable 25 Trap (66) to the lower hole in the Front Upright (42) with an M10 x 92mm Bolt (88), an M10 Washer (9), and an M10 Nylon Locknut (21). Make sure that the Cable Trap is turned to hold the Cable in place. 9 88 42 66 21 15 23 26. Route the Low Cable (23) under the 90mm Pulley (15). Attach the Pulley and a Cable 26 Trap (66) to the upper hole in the Press Frame (17) with an M10 x 83mm Bolt (67), an M10 Washer (9), and an M10 Nylon Locknut (21). Make sure that the Cable Trap is turned to hold the Cable in the groove of the Pulley. 23 17 67 9 15 21 66 27. Route the Low Cable (23) under a 90mm Pulley (15). Attach the Pulley and a Cable 27 Trap (66) to the upper hole in the Front Upright (42) with an M10 x 92mm Bolt (88), an M10 Washer (9), and an M10 Nylon Locknut (21). Make sure that the Cable Trap (66) is turned to hold the Cable in place 23 42 15 66 21 9 88 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
14
25. Route the Low Cable (23) under a 90mm
Pulley (15). Attach the Pulley and a Cable
Trap (66) to the lower hole in the Front
Upright (42) with an M10 x 92mm Bolt (88),
an M10 Washer (9), and an M10 Nylon
Locknut (21).
Make sure that the Cable Trap
is turned to hold the Cable in place.
26. Route the Low Cable (23) under the 90mm
Pulley (15). Attach the Pulley and a Cable
Trap (66) to the upper hole in the Press
Frame (17) with an M10 x 83mm Bolt (67), an
M10 Washer (9), and an M10 Nylon Locknut
(21).
Make sure that the Cable Trap is
turned to hold the Cable in the groove of
the Pulley.
27. Route the Low Cable (23) under a 90mm
Pulley (15). Attach the Pulley and a Cable
Trap (66) to the upper hole in the Front
Upright (42) with an M10 x 92mm Bolt (88),
an M10 Washer (9), and an M10 Nylon
Locknut (21).
Make sure that the Cable Trap
(66) is turned to hold the Cable in place
27
25
26
CABLE ASSEMBLY
88
23
9
21
15
42
66
21
88
23
15
66
42
9
23
17
9
66
15
67
21