Weider Wedier Pro 9635 Canadian English Manual - Page 16

31. Wrap the Military Press Cable (72) over a 90mm Pulley (15). Attach the Pulley to the Top Frame (55) with an M10 x 47mm Bolt (12) and an M10 Nylon Locknut (21). See the inset drawing. Wrap the Military Press Cable (72) under a 90mm Pulley (15). Attach the Pulley and a Cable Trap (66) to the bracket on the Stabilizer (5) with an M10 x 47mm Bolt (12) and an M10 Nylon Locknut (21). Make sure that the Cable Trap is turned to hold the Cable in place. 31 55 15 21 12 72 21 66 15 72 Bracket 12 5 32. Wrap the Military Press Cable (72) over a 90mm Pulley (15). Attach the Pulley and a Cable Trap (66) to the Pivot Arm (101) with an M10 x 92mm Bolt (88), an M10 Washer (9), and an M10 Nylon Locknut (21). Make sure that the Locknut is on the side shown and that the Cable Trap is positioned to hold the Cable in place. 32 88 66 15 9 101 72 21 CABLE ASSEMBLY 16