Weider Wedier Pro 9635 Canadian English Manual - Page 19
Seat Assembly
View all Weider Wedier Pro 9635 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
SEAT ASSEMBLY 38. Orient the Front Backrest (41) as shown. 38 Attach the Backrest to the Front Upright (42) with two M6 x 63mm Screws (43) and two M6 Washers (10). 42 41 43 10 39. Insert an M6 x 50mm Carriage Bolt (38) through the center hole in the Seat Plate (37). 39 Attach the Seat Plate to the Seat (13) with two M6 x 16mm Screws (18). Insert the M6 x 50mm Carriage Bolt (38) through the indicated hole in the Front Seat Frame (36). Tighten an M6 Nylon Locknut (2) with an M6 Washer (10) onto the Carriage Bolt. Attach the other end of the Seat (13) to the Front Seat Frame (36) with an M6 Washer (10) and an M6 x 50mm Screw (81). 40. Lubricate the M8 x 57mm Bolt (33). Attach the Leg Lever (29) to the Front Seat Frame (36) 40 with the Bolt and an M8 Nylon Locknut (3). Do not overtighten the Locknut; the Leg Lever must be able to pivot easily. Insert the Eyebolt (35) into the Leg Lever (29) from the direction shown. Tighten an M10 Nylon Locknut (21) with an M10 Washer (9) onto the Eyebolt. Thick End 13 37 81 10 38 18 36 2 36 3 33 29 35 9 21 41 41. Rest the Front Seat Frame (36) on the indicated pin in the Front Upright (42). Attach the Front Seat Frame to the Front Upright with an M8 x 70mm Carriage Bolt (14) and the Seat Knob (40). 42 40 14 36 Pin 19