Xerox 850DX Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 58
Controller Error Codes
UPC - 042215454865
View all Xerox 850DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction 50 Controller Error Codes The Controller firmware supports the printing of the Error Code Log as part of the information contained in the CONFIGURATION Test Print. The information is displayed in the following format. ERROR LOG: (NNNNNNNN,CCCCCCCCCC Where: NNNNNNNN is a decimal number representing the number of seconds the Controller has been powered on and running. CCCCCCCC represents the error code. The first (NNNNNNNN,CCCCCCCC) pair displayed contains the total number of seconds the Controller has been powered on and running and an error code of 00000000. A maximum of 19 additional (NNNNNNNN,CCCCCCCC) pairs are displayed. The number of seconds of power-on time displayed in the additional pairs is the time at which the error occurred. The additional pairs are displayed in order from most recent to oldest error. Restoring Factory Defaults will clear the error codes from the log. Loading a new release of firmware on the Controller will also clear the error codes from the log. The total number of seconds of power-on time value is not cleared by restoring Factory Defaults. Instructions for restoring factory defaults, are provided in the XES Synergix 8825/8830/8850 Controller Setup Manual for Firmware 8.0, or in the Web Printer Manager Tool User Guide (for firmware version 8.0). For full firmware uploading instructions see the Firmware Release Notes that accompany all firmware releases (on CD or the Internet at www.xes.com).