Xerox P8EX Spire CXP8000 Color Server - User Guide - Page 325
Calibrating the Spire CXP8000 Color Server, The Auto Adjusted window appears.
UPC - 095205085853
View all Xerox P8EX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 325 highlights
Calibration 311 The Auto Adjusted window appears. 4. Change the Percent of Printer Max Setup density if required, by moving the slider, or by typing a percentage value in the corresponding box. Note: The default percentage value is 85%. 5. Click Save. Important: Changes to the calibration method during RIP will not take effect. Calibrating the Spire CXP8000 Color Server The Calibration window enables you to create and edit calibration tables. You can use the Color Calibration Wizard to create a calibration table, or edit an existing calibration table. The Color Calibration Wizard analyzes the measurements and creates calibration tables. Using these tables, the Spire CXP8000 color server compensates for the difference between the printer's performance and the required values. The following calibration look up tables are provided: • None: Applies no calibration table to the job. • SpireNormal: Applies the factory default calibration table. Since this is a default look up table it cannot be overwritten.