Xerox P8EX Spire CXP8000 Color Server - User Guide - Page 341
Printing the Job with the Calibration Table, Default Color Flow
UPC - 095205085853
View all Xerox P8EX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 341 highlights
Calibration 327 • Properties: paperweight, screening, paper coating Note: When the density of the Xerox DocuColor 8000 Digital Color Press is lower than 80% of the target density, the following message appears: "Attention: Below standard D-Max value(s) measured for . Standard (Minimum): , , , Measured: , , , ". Printing the Job with the Calibration Table Now that you have calibrated the paper you are going to use for printing, you can select the calibration table to print any job on the same paper stock using the same screen type. You can print the reference job you printed before with the new calibration table to evaluate the calibration results. To print the reference job: 1. In the Spire CXP8000 color server workspace, suspend the Process Queue. 2. Import the job. 3. Double-click the job to open the Job Parameters window. 4. In the Paper Stock tab, select the desired paper stock. 5. On the Color tab, select the calibration you created for the particular stock from which you printed. For more information about the Color tab, see Default Color Flow on page 328. 6. In the Color tab, select the screening method you used for the selected calibration. 7. Set all other desired parameters, and then click OK to close the Job Parameters window. 8. Activate the Process Queue and Print Queue, and inspect the printed job. If you see that the print out has any color imperfection, review the job parameter settings and make changes if necessary. If there are still color imperfections, perform machine maintenance and repeat the calibration process.