Xerox P8EX Spire CXP8000 Color Server - User Guide - Page 59

Setting PPD File Parameters 45 Table 4: PPD parameters PPD Parameter Destination profile Printing Options Linked uses the destination profile that was mapped to a paper color in the Resource Center>Profile Manager DC_8000_C.GA and DC_8000_U.COM are predefined destination profiles. Calibration Normal prints using the normal calibration table. Saturated prints using the saturated calibration table. None prints without calibration, therefore, there is no balance between colors and gives no color calibration data. Screening Method Automatic applies two types of screens: • For CT, the system uses Dot type screen of 200 lpi. • For LW (text / line-art elements), the system uses Line type screen of 200 lpi. Dot 150 applies Dot type screen of 150 lpi. Dot 200 applies Dot type screen of 200 lpi. Line 200 applies line type screen of 200 lpi. Line 300 applies line type screen of 300 lpi. Line 600 applies line type screen of 600 lpi. Ink Saving (GCR) No does not use GCR and uses default maximum toner settings. Use Low, Medium, or High to set the amount of CMY toners to be replaced by the black toner. High provides low ink coverage while saving on toner (this prevents the occasional peeling of ink and the curling effect that may occur when printing transparencies). Brightness Brightness settings can be applied to RTP jobs without reprocessing (reRIPing the file). Normal keeps the current job setting and does not apply extra brightness. To apply brightness, select one of the range options: Light (5%), Lighter (10%), Lightest (15%), Dark (5%), Darker (10%), Darkest (15%). Contrast Contrast settings can be applied to RTP jobs without reprocessing (reRIPing the file). Normal keeps the current job setting and does not apply extra contrast. To apply contrast, select Less Contrast or More Contrast.