Xerox P8EX Spire CXP8000 Color Server - User Guide - Page 333

Calibration 319 15. After each scan, wait for the check mark to appear next to the appropriate icon and follow the instructions as listed. Note: Ensure that the separation columns on the Image Density Chart are scanned in the order they appear in the icons: Cyan>Magenta>Yellow>Black. When all of the separation columns have been successfully measured, a check mark appears next to all icons. 16. If in Step 1 of the wizard, you selected Auto from the Select screening method list, you are now required to sweep the Text/Line Art Chart. Follow the same scan sequence. Begin each chart with the cyan column. Note: After the LW Density black separation is scanned and the beep is heard, it can take several seconds until the check mark appears in the box. When all of the Text/Line Art separation columns have been successfully measured, a check mark appears next to all icons. Note: If at any stage the scanning has not been completed properly, click Reset and scan again.