Yamaha 03D Owner's Manual - Page 41

R with Akai DR8 Hard Disk Recorder

Get Yamaha 03D PDF manuals and user guides View all Yamaha 03D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

36 02R Applications 13 02R with Akai DR8 Hard Disk Recorder This application shows how the 02R can be used with an Akai DR8 Hard Disk Recorder to create a 24-input, 8-track digital recording system. The eight digital tape returns and 24 Mic/Line inputs provide up to 32 inputs at mixdown. In addition, the 02R's built-in automation and scene memory systems provide both dynamic and static mix automation referenced to timecode. Connections • The ADAT (CD8-AT) card must be screwed securely in place. Do not leave the screws out after installation as the cards will not be grounded correctly. • The DR8 is fitted with an optional ADAT (IB-804A) interface card. For MTC operation, the DR8 requires an optional MIDI (IB803M) interface card. For SMPTE operation, an optional SMPTE (IB802T) interface card. • The Digital In/Out connectors on the 02R and DR8 are connected together using Optical Cables. • The DR8 is connected to Slot [1] of the 02R. These tape inputs correspond to tracks one through eight. 02R Wordclock Setup The 02R works as wordclock slave. An ADAT (CD8-AT) card is installed in Slot [1], so any pair of the tape inputs from 1 to 8 can be selected as the wordclock source on the DIGITAL I/O menu. DR8 Wordclock Setup The DR8 works as wordclock master. Notes • When a track is armed for recording, the DR8 will normally try to take its wordclock source from that track's input. To prevent this, in the Digi submenu set Auto Sync to Off. Note that the Auto Sync setting is not memorized when the DR8 is turned off, although it can be stored as part of a project. Yamaha 02R & 03D Applications Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
36
02R Applications
Yamaha 02R & 03D Applications Guide
13
02R with Akai DR8 Hard Disk Recorder
This application shows how the 02R can be used with an Akai DR8 Hard Disk Recorder to
create a 24-input, 8-track digital recording system. The eight digital tape returns and 24
Mic/Line inputs provide up to 32 inputs at mixdown. In addition, the 02R’s built-in
automation and scene memory systems provide both dynamic and static mix automation
referenced to timecode.
Connections
•
The ADAT (CD8-AT) card must be screwed securely in place. Do not leave the screws out
after installation as the cards will not be grounded correctly.
•
The DR8 is fitted with an optional ADAT (IB-804A) interface card. For MTC operation,
the DR8 requires an optional MIDI (IB803M) interface card. For SMPTE operation, an
optional SMPTE (IB802T) interface card.
•
The Digital In/Out connectors on the 02R and DR8 are connected together using Optical
Cables.
•
The DR8 is connected to Slot
[1]
of the 02R. These tape inputs correspond to tracks one
through eight.
02R Wordclock Setup
The 02R works as wordclock slave. An ADAT (CD8-AT) card is installed in Slot
[1]
, so any
pair of the tape inputs from 1 to 8 can be selected as the wordclock source on the DIGITAL
I/O menu.
DR8 Wordclock Setup
The DR8 works as wordclock master.
Notes
•
When a track is armed for recording, the DR8 will normally try to take its wordclock
source from that track’s input. To prevent this, in the Digi submenu set Auto Sync to Off.
Note that the Auto Sync setting is not memorized when the DR8 is turned off, although
it can be stored as part of a project.