Yamaha 03D Owner's Manual - Page 43
R with Akai DR16 Hard Disk Recorder
View all Yamaha 03D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
38 02R Applications 14 02R with Akai DR16 Hard Disk Recorder This application shows how the 02R can be used with an Akai DR16 Hard Disk Recorder to create a 24-input, 16-track digital recording system. The 16 digital tape returns and 24 Mic/Line inputs provide up to 40 inputs at mixdown. In addition, the 02R's built-in automation and scene memory systems provide both dynamic and static mix automation referenced to timecode. The DR16 is a 16-track hard disk recorder featuring 8-track recording and 16-track playback. The ADAT (IB804AEX) interface card provides eight digital inputs and 16 digital outputs. Connections • The ADAT (CD8-AT) cards must be screwed securely in place. Do not leave the screws out after installation as the cards will not be grounded correctly. • The DR16 is fitted with the following options: ADAT (IB804AEX) interface card and MIDI (IB803M) interface card. • The Digital In/Out connectors on the 02R and DR16 are connected together using Optical Cables. • The DR16 digital output connected to Slot [1] of the 02R corresponds to tracks one through eight, while the DR16 digital output connected to Slot [2]corresponds to tracks nine through sixteen. 02R Wordclock Setup The 02R works as wordclock slave. With ADAT (CD8-AT) cards installed in Slot [1] and Slot [2], any pair of the first 16 tape inputs can be selected as the wordclock source on the DIGITAL I/O menu. DR16 Wordclock Setup The DR16 works as wordclock master. Notes • When a track is armed for recording, the DR16 will normally try to take its wordclock source from that track's input. To prevent this, in the Digi submenu set Auto Sync to Off. Note that the Auto Sync setting is not memorized when the DR16 is turned off, although it can be stored as part of a project. Yamaha 02R & 03D Applications Guide