Yamaha 03D Owner's Manual - Page 66
D Applications - manual
View all Yamaha 03D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
03D 03D Applications 61 AUTO NAVIGATE-This function checks all possible wordclock sources and then displays a dialog box recommending a suitable source. Note, however, that this function is not perfect and in some situations it may not be able to recommend a suitable source. The dialog box shown here appears when this function is selected. MANUAL-These options allow you to select the wordclock source. Internal wordclock at 44.1 kHz Internal wordclock at 48 kHz External wordclock via the DIGITAL STEREO IN (AES/EBU or Coaxial). The STEREO INPUT ASSIGN FLIP switch on the D.in Setup page must be set so that the AES/EBU or Coaxial signal is assigned to the ST IN. External wordclock via the BNC WORD CLOCK IN connection External wordclock via the YGDAI card inputs 1 and 2 External wordclock via the YGDAI card inputs 3 and 4 External wordclock via the YGDAI card inputs 5 and 6 External wordclock via the YGDAI card inputs 7 and 8 The status of the wordclock is indicated as follows. 03D locked to this wordclock source Usable wordclock present Wordclock signal present but not synchronized to selected wordclock. If such a signal is connected and the DIGITAL ST IN SYNC CAUTION or YGDAI IN SYNC CAUTION preference is set to ON, a warning message appears. No wordclock signal available. FS-When the 03D is locked to a wordclock, the sampling rate appears here (48k, 44.1k, or 32k). When it is unlocked, the display shows UNLOCK. If another page is accessed in the unlocked state, UNLOCK appears on that page too. Yamaha 02R & 03D Applications Guide