Yamaha 03D Owner's Manual - Page 57
R with Pro Tools for Video Post
View all Yamaha 03D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
52 02R Applications 21 02R with Pro Tools for Video Post This application shows how the 02R can be used with a video machine and Pro Tools system for audio post-production and audio sweetening. The 16 digital tape returns and 24 Mic/Line inputs provide up to 40 inputs. In addition, the 02R's built-in automation and scene memory systems provide both dynamic and static mix automation referenced to SMPTE or MIDI timecode. Two Digidesign 888 I/O Audio Interfaces connect the 02R to the Pro Tools system, with special 50-pin Pro Tools cables between the computer cards and each 888. Two custom-made D-sub to XLR break-out cables are used to connect the 25-pin connectors on the CD8-AE-S cards to the 888s. Pro Tools can be controlled remotely from the 02R V2 using the Pro Tools template of the MIDI Remote function. Connections • The AES/EBU (CD8-AE-S) cards must be screwed securely in place. Do not leave the screws out after installation as the cards will not be grounded correctly. • The Digital In/Out connectors on the 02Rs and 888s are connected together using custom-made D-sub to XLR cables. • The Pro Tools system is connected to 02R Slot [1] (tape inputs 1 through 8) and Slot [2](tape inputs 9 through 16). 02R Wordclock Setup The 02R works as a wordclock slave. On the DIGITAL I/O menu, set the wordclock source to TAPE 1/2 (i.e., AES/EBU 1/2). Pro Tools Wordclock Setup The Pro Tools system should be configured as wordclock master. Notes • The D-sub XLR break-out cable is not available from Yamaha, and should be custom made. • The slave clock (Super Clock) signal connected between Digidesign products is an exclusive clock, with a sampling rate of Fs x 256. Yamaha 02R & 03D Applications Guide