Yamaha 03D Owner's Manual - Page 63

58 03D Applications Akai DR8 & DR16 • When a track is armed for recording, the DR8 or DR16 will normally try to take its wordclock source from that track's input. To prevent this, in the Digi submenu set Auto Sync to Off. Note that the Auto Sync setting is not memorized when the DR8 or DR16 is turned off, although it can be stored as part of a project. 03D Optional Interface Cards To interface the 03D with digital multitrack equipment, an optional interface card is required. One single-size interface card can be installed in the 03D. Available Cards The following table lists the interface cards available for use with the 03D. Card Description CD8-AT CD8-TDII CD8-AE-Sa CD8-Y CD8-CS KIT ADAT Digital I/O Tascam TDIF-1 Digital I/O AES/EBU Digital I/O Yamaha Digital I/O Digital Cascade Kitb a. Cable not included. b. Kit includes two cards and one cable. Connectors Optical x2 25-pin D-sub x1 25-pin D-sub x1 25-pin D-sub x1 25-pin D-sub x1 YGDAI Digital Inputs The eight YGDAI digital inputs of the interface card work as 03D inputs for input channels 17 through 24, and cannot be reconfigured. Assigning Signals to the YGDAI Outputs The following table shows which signal sources can be assigned to the eight YGDAI digital outputs. Note that these signals are not sourced directly from the 03D buses. They are sourced from the actual outputs before D/A conversion. so they are affected, for example, by the stereo, bus, and aux send master faders, EQ, and dynamics processors. Output 1 2 3 4 5 6 7 8 Source BUS 1, AUX 1, Direct Out 1, Direct Out 9, or STEREO L BUS 2, AUX 2, Direct Out 2, Direct Out 10, or STEREO R BUS 3, AUX 3, Direct Out 3, Direct Out 11, or STEREO L BUS 4, AUX 4, Direct Out 4, Direct Out 12, or STEREO R BUS 1, AUX 1, Direct Out 5, Direct Out 13, or STEREO L BUS 2, AUX 2, Direct Out 6, Direct Out 14, or STEREO R BUS 3, AUX 3, Direct Out 7, Direct Out 15, or STEREO L BUS 4, AUX 4, Direct Out 8, Direct Out 16, or STEREO R Yamaha 02R & 03D Applications Guide