Yamaha CLP-950 Owner's Manual - Page 16

The Dual Mode

Page 16 highlights

The Dual Mode The dual mode makes it possible to play two voices simultaneously across the entire range of the keyboard. AND E. PIANO E. PIANO HARPSI- VIBRA- CHU NO 2 1 2 CHORD PHONE ORG Voice numbering priority 1 2 3 4 5 6 7 8 9 10 11 12 GRAND GRAND E. PIANO E. PIANO HARPSI- VIBRA- CHURCH JAZZ STRINGS CHOIR WOOD E. BASS PIANO 1 PIANO 2 1 2 CHORD PHONE ORGAN ORGAN BASS VOICE CLP-950 To activate the dual mode simply press two voice selectors at the same time (or press one voice selector while holding another). The voice indicators of both selected voices will light when the dual mode is active. To return to the normal single-voice play mode, press any single voice selector. According to the voice numbering priority as shown in the diagram on the left, lower valued voice numbers will be designated as the 1st Voice (the other voice will be designated as the 2nd Voice). NOTE • The dual and split modes (CLP-950) cannot be engaged at the same time. • [EFFECT] in the Dual Mode Depending upon the conditions one effect type will take priority over the other. Depth will be decided according to the depth default value of the voice combination. However, using function F3 (see page 29) you can change the depth value for each voice as you like. Effect depth setting via the panel controls (i.e. pressing the [-/NO] or [+/ YES] buttons while holding the [EFFECT] button - see page 19) will be applied to the 1st Voice only. • [REVERB] in the Dual Mode The reverb type assigned to the 1st Voice will take priority over the other. (If the reverb is set to OFF, the 2nd Voice's reverb type will be in affect.) Reverb depth setting via the panel controls (i.e. pressing the [-/NO] or [+/ YES] buttons while holding the [REVERB] button - see page 18) will be applied to the 1st Voice only. Other Dual Mode Functions The Clavinova Function mode provides access to a number of other dual-mode functions, listed below. See the corresponding pages for details. • Dual Balance 29 • Dual Detune 29 • 1st Voice Octave Shift 29 • 2nd Voice Octave Shift 29 • 1st Voice Effect Depth 30 • 2nd Voice Effect Depth 30 • Reset 30 16 CLP-950/930

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66

16
CLP-950/930
The Dual Mode
The dual mode makes it possible to play two voices simultaneously across
the entire range of the keyboard.
To activate the dual mode simply press two voice selectors at the
same time (or press one voice selector while holding another). The
voice indicators of both selected voices will light when the dual mode is
active. To return to the normal single-voice play mode, press any single
voice selector.
According to the voice numbering priority as shown in the diagram
on the left, lower valued voice numbers will be designated as the 1st
Voice (the other voice will be designated as the 2nd Voice).
NOTE
The dual and split modes (CLP-950) cannot be engaged at the same
time.
[EFFECT] in the Dual Mode
Depending upon the conditions one effect type will take priority over the
other. Depth will be decided according to the depth default value of the
voice combination. However, using function F3 (see page 29) you can
change the depth value for each voice as you like.
Effect depth setting via the panel controls (i.e. pressing the [-/NO] or [+/
YES] buttons while holding the [EFFECT] button
see page 19) will be
applied to the 1st Voice only.
[REVERB] in the Dual Mode
The reverb type assigned to the 1st Voice will take priority over the other.
(If the reverb is set to OFF, the 2nd Voice
s reverb type will be in affect.)
Reverb depth setting via the panel controls (i.e. pressing the [-/NO] or [+/
YES] buttons while holding the [REVERB] button
see page 18) will be
applied to the 1st Voice only.
Other Dual Mode Functions
...............................................................
The Clavinova Function mode provides access to a number of other
dual-mode functions, listed below. See the corresponding pages for
details.
Dual Balance
.................................................
29
Dual Detune
..................................................
29
1st Voice Octave Shift
...................................
29
2nd Voice Octave Shift
..................................
29
1st Voice Effect Depth
...................................
30
2nd Voice Effect Depth
..................................
30
Reset
.............................................................
30
Voice numbering priority
AND
NO 2
E. PIANO
1
E. PIANO
2
HARPSI-
CHORD
VIBRA-
PHONE
CHU
ORG
1
2
3
4
5
6
7
8
9
10
11
12
VOICE
GRAND
PIANO 1
GRAND
PIANO 2
E. PIANO
1
E. PIANO
2
HARPSI-
CHORD
VIBRA-
PHONE
CHURCH
ORGAN
JAZZ
ORGAN
STRINGS
CHOIR
WOOD
BASS
E. BASS
CLP-950