Yamaha CVP-805 CVP-809/CVP-805 Owners Manual - Page 109
Connecting a Microphone or Guitar ([MIC/LINE IN] jack)
View all Yamaha CVP-805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Connecting a Microphone or Guitar ([MIC/LINE IN] jack) To the [MIC/LINE IN] jack (standard 1/4" phone jack), you can connect a microphone, guitar, or other various equipment. For instructions on connecting a microphone, refer to page 83. Note that you need to select "MIC" or "LINE IN" depending on the connected equipment. When the output level of the connected equipment (such as a microphone, guitar, bass) is low, set the [MIC/LINE] switch to "MIC." When the output level of the connected equipment (such as a synthesizer, keyboard, CD player) is high, set the [MIC/LINE] switch to "LINE." Connecting a Footswitch/Foot Controller ([AUX PEDAL] jack) The FC4A or FC5 footswitches and the FC7 foot controller (sold separately) can be connected to [AUX PEDAL] jack. A footswitch can be used for switching functions on and off, while a foot controller controls continuous parameters such as volume. Connections - Using Your Instrument with Other Devices - Foot Pedals Footswitch FC4A Footswitch FC5 Foot Controller FC7 Example 1: Using a foot controller to control the volume of the performance data played on the keyboard. Connect an FC7 foot controller to the [AUX PEDAL] jack. With the initial factory settings, no special setup is necessary. Example 2: Using a footswitch to control Song Start/Stop. Connect a footswitch (FC4A or FC5) to the [AUX PEDAL] jack. To assign the function to the connected pedal, select "Song Play/Pause" in the operation display: [Menu] → [Assignable] → [Pedal]. 10 NOTE • Make sure to connect or disconnect the pedal only when the power is off. • Do not press the footswitch/foot pedal while turning the power on. Doing this changes the recognized polarity of the footswitch, resulting in reversed footswitch operation. CVP-809/CVP-805 Owner's Manual 109