Yamaha CVP-805 CVP-809/CVP-805 Owners Manual - Page 115
Install the pedal box., the lyre braces in the direction of arrows as illustrated.
View all Yamaha CVP-805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
5 Install the pedal box. Remove the twist tie and tape that affix the pedal cord to the upper portion of the pedal box. . Tape Twist tie Attach the front side of the pedal box to the bottom of the unit by finger-tightening the two fixing screws (6 x 20 mm). 6 x 20 mm fixing screws Loosen the four screws that were attached in step 3, and then securely tighten the four screws again while pushing the lyre braces in the direction of arrows as illustrated. 6 x 20 mm fixing screws CVP-809 (Grand piano type) Assembly Insert the lyre braces into the pedal box recesses and make sure they fit securely. Insert the pedal cord plug into the pedal connector. Insert the plug so the arrow side faces front (toward the keyboard). If the plug will not go in easily, do not force it. Doublecheck the orientation of the plug, then try again. Insert the pedal cord securely until the metal part of the cord plug disappears from view. Otherwise, the pedal may not function properly. Align the cord with the groove on the unit and attach the backside of the pedal box using the two fixing screws (6 x 20 mm), and then securely tighten the two screws of the front side of the pedal box that were attached in step 5-. Attach the cord holder to the bottom of the main unit as shown, then clip the holder around the cord. CVP-809/CVP-805 Owner's Manual 115