Yamaha CVP-805 CVP-809/CVP-805 Owners Manual - Page 116
Rotate the adjuster until it comes in firm, contact with the floor surface. - review
View all Yamaha CVP-805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
6 Rotate the adjuster until it comes in firm contact with the floor surface. 7 Plug the power cord into the [AC IN] jack. After completing the assembly, please check the following. • Are there any parts left over? → Review the assembly procedure and correct any errors. • Is the instrument clear of doors and other movable fixtures? → Move the instrument to an appropriate location. • Does the instrument make a rattling noise when you shake it? → Tighten all screws. • Does the pedal box rattle or give way when you step on the pedals? → Turn the adjuster so that it is set firmly against the floor. • Are the pedal and power cords inserted securely into the sockets? CAUTION When moving the instrument, always hold the bottom of the main unit. Do not hold the key cover or top portion. Improper handling can result in damage to the instrument or personal injury. Right leg on the bottom of the main unit, when viewed from front. 8 Attach the headphone hanger. Attach the headphone hanger using two thin screws (4 x 10 mm) as shown in the illustration. 4 x 10 mm thin screws CAUTION To disassemble the unit, reverse the assembly sequence. Failure to do so can result in damage to the instrument or personal injury. In particular, if you lay down the main unit without detaching the pedal box, the pedals will break. Do not hold here. Do not hold here. Transporting If you move to another location, you can transport the instrument along with other belongings. You can move the unit as it is (assembled) or you can disassemble the unit down to the condition it was in when you first took it out of the box. Transport the keyboard horizontally. Do not lean it up against a wall or stand it up on its side. Do not subject the instrument to excessive vibration or shock. When transporting the assembled instrument, make sure all screws are properly tightened and have not been loosened by moving the instrument. CAUTION If the unit creaks or is otherwise unsteady when you play on the keyboard, refer to the assembly diagrams and retighten all screws. 116 CVP-809/CVP-805 Owner's Manual