Yamaha CVP-805 CVP-809/CVP-805 Owners Manual - Page 126
Mixer, Pedal/AUX Pedal, Connection, The Bluetooth-e
![]() |
View all Yamaha CVP-805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Mixer The sound seems strange or different than expected when changing a rhythm Voice (drum kit, etc.) of the Style or Song from the Mixer. When changing the rhythm/percussion Voices (drum kits, etc.) of the Style and Song from the VOICE parameter, the detailed settings related to the drum voice are reset, and in some cases you may be unable to restore the original sound. You can restore the original sound by selecting the same Song or Style again. Pedal/AUX Pedal The damper, sostenuto and soft functions do The pedal cord plug is not connected to the pedal jack securely. Securely not work for the relevant pedals. insert the pedal cord plug into the proper jack (pages 115, 119, 122). Make sure that each pedal is properly assigned to "Sustain," "Sostenuto" and "Soft" (page 38). The on/off setting of the footswitch/foot Turn the instrument's power off, then turn it on again without pressing the controller connected to the [AUX PEDAL] jack footswitch/foot controller, or change the Polarity parameter from [Menu] is reversed. [Assignable] [Pedal]. The damper pedal does not function properly. The power of the instrument may have been turned on while the damper pedal was pressed. Press and release the damper pedal to restore proper operation. Connection The speakers do not switch off when a pair of The Speaker setting is "On." Set the speaker setting to "Headphone headphones is connected to the [PHONES] Switch" via [Menu] [Utility] [Speaker/Connectivity]. jack. The Wireless LAN icon is not shown in the Menu display even though the USB wireless LAN adaptor is connected. Disconnect the USB wireless LAN adaptor and connect it again. The Bluetooth-equipped device cannot be paired with nor connected to the instrument. Check the Bluetooth function of the Bluetooth-equipped device is activated. To connect the Bluetooth-equipped device and the instrument, Bluetooth function of both devices need to be turned on. The Bluetooth-equipped device and the instrument need to be paired to connect each other via Bluetooth (page 105). In case there is a device (microwave oven, wireless LAN device, etc.) that outputs signals in the 2.4 GHz frequency band nearby, move this instrument away from the device that is emitting radio-frequency signals. Sound input to the [AUX IN] jack is interrupted. The output volume of the external device connected to the [AUX IN] jack of this instrument is too low. Increase the output volume of the external device. The volume level reproduced via this instrument's speakers can be adjusted by using the [MASTER VOLUME] control. The Noise Gate function may be cutting the soft sounds. If this happens, turn off the "AUX IN Noise Gate" parameter (page 104). 126 CVP-809/CVP-805 Owner's Manual
![](/manual_guide/products/yamaha-cvp809-cvp809cvp805-owners-manual-3a48ac8/126.png)