Yamaha DVX-S302 Owner's Manual - Page 22

Connecting the speaker cables, Connecting the subwoofer, PREPARATION, FRONT R Red, CENTER Green

Page 22 highlights

■ Connecting the speaker cables Connect the speaker cable with the color band to the plus (Red (+)) connector on the front/center/surround speakers and with the white line to the minus (Black (-)) connector. Color band SYSTEM CONNECTIONS Before connecting the speaker cables to the subwoofer (NX-SW300), remove the cable plugs from supplied speaker cables. Press and hold the release button and remove the supplied speaker cable from the cable plug. 2 PREPARATION Lever (Black) Lever (Red) Press the lever down, then insert the cable into the hole and release the lever. Lever (Red) Color band Release button Note Be sure to twist the cable core firmly in a clockwise direction. Twisting loosely may cause a short. Good No Good Lever (Black) FRONT R (Red), CENTER (Green), FRONT L (White): SURROUND R (Gray), SURROUND L (Blue): Press the lever down, then insert the cable into the hole and release the lever. ■ Connecting the subwoofer Insert the cable plug of the speaker cable into the speaker jack of the same color until you hear it click into place. • FRONT R (Red), CENTER (Green), FRONT L (White): Insert the cable plug facing the tub upwards. • SURROUND R (Gray), SURROUND L (Blue): Insert the cable plug facing the tub downwards. Tab Gray Red Green White Blue Tab Lever SPEAKERS color band FRONT CENTER SURROUND Lift up the lever, then insert the cable into the hole and replace the lever. NX-SW300 Note Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug or speaker jack. English NX-SW301 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65

SYSTEM CONNECTIONS
17
English
PREPARATION
2
Connecting the speaker cables
Connect the speaker cable with the color band to the plus
(Red (+)) connector on the front/center/surround speakers
and with the white line to the minus (Black (–)) connector.
Connecting the subwoofer
Insert the cable plug of the speaker cable into the speaker
jack of the same color until you hear it click into place.
FRONT R (Red), CENTER (Green), FRONT L
(White):
Insert the cable plug facing the tub
upwards.
SURROUND R (Gray), SURROUND L (Blue):
Insert the cable plug facing the tub downwards.
Before connecting the speaker cables to the subwoofer
(NX-SW300), remove the cable plugs from supplied
speaker cables.
Press and hold the release button and remove the supplied
speaker cable from the cable plug.
Be sure to twist the cable core firmly in a clockwise
direction. Twisting loosely may cause a short.
FRONT R (Red), CENTER (Green), FRONT L
(White):
SURROUND R (Gray), SURROUND L (Blue):
Do not use excessive force when inserting the cable
plug. Doing so may damage the cable plug or speaker
jack.
Lever
(Black)
Color
band
Press the lever down, then
insert the cable into the hole
and release the lever.
Lever
(Red)
Press the lever down, then
insert the cable into the hole
and release the lever.
Color
band
Lever
(Red)
Lever
(Black)
Tab
Red
Green
Tab
Gray
White
Blue
NX-SW301
Note
Note
Release button
Good
No Good
FRONT CENTER SURROUND
SPEAKERS
Lift up the lever, then insert
the cable into the hole and
replace the lever.
Lever
color
band
NX-SW300