Yamaha DVX-S302 Owner's Manual - Page 24

OTHER CONNECTIONS OTHER CONNECTIONS ■ Connecting a TV 2 Notes - You only need to make one video connection from the following options (A,B,C, or D), depending on the capabilities of your TV. - Do not connect the power cords until all cable connections are completed. PREPARATION TV AV MONITOR OUT (DVD ONLY) VIDEO OUT (DVD ONLY) VIDEO Y DIGITAL IN L OPTICAL R DVR-S300 (U.K. and Europe models only) S VIDEO PR PB COMPONENT PCM/DTS LINE OUT TV IN q DIGITAL AUX IN AV MONITOR OUT terminal (U.K. and Europe models only) The SCART cable, or "Euro AV cable", supports AV MONITOR OUT signal transmission, providing you with the best possible picture and sound. If your TV has only one terminal for video input, and you want to connect it directly to the DVD receiver, you can use the AV MONITOR OUT connector. Connect one end of the SCART cable to the AV MONITOR OUT connector and the other end to the SCART connector on your TV. Note TV channels, if you use AV MONITOR OUT terminal to connect the TV. To use AV MONITOR OUTterminal, make sure to set the DVD receiver's component setting to "RGB" (see page 25). S VIDEO output terminal S-(separate)video connections achieve a clearer picture than composite video connections. Use an S-video cable (not supplied) to connect the DVD receiver's S VIDEO jack to the S-video input jack (or Y/C or S-VHS jack) on your TV. VIDEO output terminal Use a composite video cable (yellow -supplied) to connect the DVD receiver's VIDEO jack to the video input jack (or A/V In/Video In/Composite/ Baseband jack) on your TV. COMPONENT VIDEO OUT terminals Use the component video cables (red/blue/green, not supplied) to connect the DVD receiver's Y PB PR jacks to the corresponding component video input jacks (or the Y Pb/Cb Pr/Cr/ YUV jacks) on your TV. Progressive scan video quality is only available when using Y PB PR in conjunction with a progressive scan TV. To activate the progressive scan function see "Progressive function" on page 39. 19 English