Yamaha HTR-5460 Owner's Manual

Yamaha HTR-5460 Manual

Get Yamaha HTR-5460 PDF manuals and user guides View all Yamaha HTR-5460 manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha HTR-5460 manual content summary:

  • Yamaha HTR-5460 | Owner's Manual - Page 1
    U C A HTR-5460 Natural Sound AV Receiver Ampli-tuner audio-vidéo OWNER'S MANUAL MODE D'EMPLOI
  • Yamaha HTR-5460 | Owner's Manual - Page 2
    SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol
  • Yamaha HTR-5460 | Owner's Manual - Page 3
    810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H) FCC INFORMATION (for US customers only) 1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications
  • Yamaha HTR-5460 | Owner's Manual - Page 4
    YAMAHA service personnel when any service setting this switch, disconnect the AC power plug of this unit from the AC outlet. IMPORTANT Please record the serial number of this unit in the space below. MODEL: Serial No.: The serial number is located on the rear of the unit. Retain this Owner's Manual
  • Yamaha HTR-5460 | Owner's Manual - Page 5
    CINEMA DSP Programs 51 SOUND FIELD PROGRAM PARAMETER EDITING 54 What is a sound field 54 Sound Field Program Parameters 54 Changing Parameter Settings 55 Resetting a Parameter to the Factory-set Value ...... 55 Sound Field Parameter Descriptions 56 APPENDIX TROUBLESHOOTING 59 SPECIFICATIONS
  • Yamaha HTR-5460 | Owner's Manual - Page 6
    and General models] Main: 115 W + 115 W (8 Ω) Center: 115 W (8 Ω) Rear: 115 W + 115 W (8 Ω) Multi-Mode Digital Sound Field Processing x DTS Decoder x Dolby Pro Logic Decoder x Dolby Digital Decoder x Hi-Fi DSP x CINEMA DSP: Combination of YAMAHA DSP Technology and Dolby Pro Logic, Dolby Digital or
  • Yamaha HTR-5460 | Owner's Manual - Page 7
    models) Connection guide BASIC OPERAIONT ADVANCED OPERATION ADDITIONAL INFORMATION APPENDIX Installing Batteries in the Remote Control in the remote control, the contents of the memory may be cleared. When the memory is cleared, insert new batteries, set up the manufacturer code that may have
  • Yamaha HTR-5460 | Owner's Manual - Page 8
    ON Turns on or sets this unit in the standby mode. When you turn on this unit, you will hear a click and there will be a 4 to 5-second delay before this unit can reproduce sound. Standby mode In this mode, this unit consumes a small amount of power to receive infrared-signals from the remote control
  • Yamaha HTR-5460 | Owner's Manual - Page 9
    on the set of main speakers connected to the A and/or B terminals on the rear panel. q EFFECT Switches the effect speakers (center and rear) on and off. If you turn off the output of these speakers by using EFFECT, all Dolby Digital and DTS audio signals except for the LFE channel are directed to
  • Yamaha HTR-5460 | Owner's Manual - Page 10
    the remote control is set to that component operation mode. e A/B/C/D/E, PRESET -/+ These buttons are used to select a preset station. A/B/C/D/E: To select one of 5 preset station groups (A to E) PRESET -/+: To select a preset station number (1 to 8) r u/d Select DSP program parameters and SET MENU
  • Yamaha HTR-5460 | Owner's Manual - Page 11
    selector dial is set to the DSP/TUN position. • While the indicator is lit for about 3 seconds after pressing DSP. Description of the CONTROLS AND FUNCTIONS s When selecting a DSP program and turning on or off the effect speakers (center and rear) A B DSP program group buttons EFFECT A 1 Press DSP
  • Yamaha HTR-5460 | Owner's Manual - Page 12
    selecting a preset station number Using the Remote Control D I G I TA L SURROUND D I G I TA L -+ -+ 30° 30° Approximately 6 m (20 feet) 1 Set code number "0023" in the AMP/TUN (or DSP/TUN) position. See "Setting the Manufacturer Code" for setting the code. 2 Set the selector dial to the AMP
  • Yamaha HTR-5460 | Owner's Manual - Page 13
    CINEMA DSP. 3 g and o indicators Light up according to the type of Dolby signals this unit is reproducing. " g " lights up when the builtin Dolby SURROUND DSP program is selected. e Multi-information display Shows the current DSP program name and other information when adjusting or changing settings
  • Yamaha HTR-5460 | Owner's Manual - Page 14
    CONTROLS AND FUNCTIONS Rear Panel 1 2 34 5 6 7 DIGITAL INPUT CD GND AM ANT GND FM ANT TUNER DVD D-TV/CBL R+ A COAXIAL OPTICAL D-TV/CBL DVD 6CH INPUT MAIN SURROUND . Set this unit in the standby mode before you change the setting of this switch (see page 18). China and General models only
  • Yamaha HTR-5460 | Owner's Manual - Page 15
    only for reinforcing bass frequencies from any or all channels, but also for reproducing the LFE (low-frequency effect) channel with high fidelity when the Dolby Digital signal or the DTS signal is played back. The YAMAHA Active Servo Processing Subwoofer System is ideal for natural and lively bass
  • Yamaha HTR-5460 | Owner's Manual - Page 16
    the operation instructions for each component to be connected to this unit. • When you connect other YAMAHA audio SET MENU. About the dust protection cap Pull out the cap from the optical jack before you connect the fiber optic cable. Do not discard the cap. When you are not using the optical
  • Yamaha HTR-5460 | Owner's Manual - Page 17
    the main and surround channels. Notes • When you select 6CH INPUT as the input source, this unit automatically turns off the digital sound field processor, and you cannot listen to DSP programs. • When you select 6CH INPUT as the input source, changing items 1A to 1E on the SET MENU is not affected
  • Yamaha HTR-5460 | Owner's Manual - Page 18
    " on the SET MENU. Notes • Use a commercially available S-video cable when connecting to the S VIDEO jack, and commercially available video cables when connecting to the COMPONENT VIDEO jacks. • When you are using the COMPONENT VIDEO jacks, check the details in the owner's manual that came with
  • Yamaha HTR-5460 | Owner's Manual - Page 19
    INPUT CD GND AM ANT GND COAXIAL OPTICAL D-TV/CBL DVD 6CH INPUT MAIN SURROUND CENTER L L MD/CD-R OPTICAL MD/CD-R R L R SUB WOOFER instruction manual for the LD player. Note that this unit's remote control can be used to operate the LD player by setting the corresponding manufacturer code
  • Yamaha HTR-5460 | Owner's Manual - Page 20
    channel (L), right channel part of this unit. This could damage the unit and/or speakers. If necessary, use the SET MENU to change the speaker mode settings Australia, China and General models only) • Banana plug systems can be connected to these terminals. If you use only one speaker system
  • Yamaha HTR-5460 | Owner's Manual - Page 21
    subwoofer volume according to the operating instructions for the subwoofer. (Fine adjustment is possible using this unit's output level control of the effect speakers.) • Depending on the settings of "1 SPEAKER SET", "6 DOLBY D. SET" and "7 DTS SET" on the SET MENU, some signals may not be output
  • Yamaha HTR-5460 | Owner's Manual - Page 22
    according to the impedance of the speakers in your system. Be sure to move this switch only when this unit is in the standby mode. (General model) Switch Speaker Impedance level position VOLTAGE SELECTOR AC OUTLETS If you use one set of main speakers, the impedance of each speaker must
  • Yamaha HTR-5460 | Owner's Manual - Page 23
    by using "9 DISPLAY SET" on the SET MENU. Selecting the OSD Mode 1 When you turn on the power, the video monitor and front panel display show the level of the main volume for a few seconds and then switch to show the current DSP program. 2 Press ON SCREEN on the remote control repeatedly to change
  • Yamaha HTR-5460 | Owner's Manual - Page 24
    handling 5.1 channel. Although up to 6 speakers can be connected, it is possible to select the speaker mode that gives the best sound field effect according to the number and size of speakers being used. Before use, please set the speaker mode setting using "1 SPEAKER SET" on the SET MENU described
  • Yamaha HTR-5460 | Owner's Manual - Page 25
    test tone. Using the Test Tone (TEST DOLBY SUR.) The adjustment of each speaker output level should be made at your listening position with the remote control. 2,6 1 A/B/C/D/E 5 4 Before You Begin 1 STANDBY /ON D I G I TA L SURROUND BASS EXTENSION BASS TREBLE ON OFF -+ -+ SPEAKERS
  • Yamaha HTR-5460 | Owner's Manual - Page 26
    DOLBY SUR. LEFT y • If "1A CENTER SP" on the SET MENU is set to NONE, the center channel sound is automatically output from the left and right main speakers. Note • If the test tone cannot be heard, turn down the volume, set DSP program appears on the front panel display and on the video monitor. 22
  • Yamaha HTR-5460 | Owner's Manual - Page 27
    BASIC OPERATION BASIC PLAYBACK When using the remote control, set the selector dial to the AMP/TUN position. 1 6 5 STANDBY /ON D I G I TA L SURROUND BASS EXTENSION BASS TREBLE ON OFF -+ -+ SPEAKERS A B ON OFF D I G I TA L VOLUME EFFECT DSP PROGRAM PRESET /TUNING FM/AM MEMORY
  • Yamaha HTR-5460 | Owner's Manual - Page 28
    MD/CD-R TUNER CD PHONO PCM VOLUME 2. DSP programs cannot be selected. Sound will be output as normal 2-channel stereo sound from only the left and right main speakers. Note • If "1B MAIN SP" on the SET MENU is set to SMALL and "1D LFE/BASS OUT" is set to SWFR, or "1D LFE/BASS OUT
  • Yamaha HTR-5460 | Owner's Manual - Page 29
    and OPTICAL jacks, the digital signal from the COAXIAL jack is selected. • When AUTO is selected, this unit automatically determines the type of signal. If this unit detects a Dolby Digital or DTS signal, the decoder automatically switches to the appropriate setting and reproduces 5.1 channel source
  • Yamaha HTR-5460 | Owner's Manual - Page 30
    and the player. • If you play a source encoded with a DTS signal and set the input mode to ANALOG, this unit reproduces the noise of an unprocessed DTS signal a DTS source, be sure to connect the source to a digital input jack and set the input mode to AUTO or DTS. • If you switch the input mode to
  • Yamaha HTR-5460 | Owner's Manual - Page 31
    remote control 1 s On the front panel BASIC PLAYBACK STANDBY /ON D I G I TA L SURROUND BASS EXTENSION BASS TREBLE ON OFF -+ -+ SPEAKERS A B ON OFF D I G I TA L VOLUME EFFECT DSP PROGRAM PRESET /TUNING FM/AM MEMORY TUNING MODE EDIT PHONES S VIDEO VIDEO L AUDIO R OPTICAL
  • Yamaha HTR-5460 | Owner's Manual - Page 32
    rear speakers. Using YAMAHA original technology, natural surround reproduction is possible through the generation of a virtual speaker. The sound field processing is changed to the Virtual CINEMA DSP mode by setting "1C REAR L/R SP" on the SET MENU to NONE. Virtual CINEMA DSP is performed by using
  • Yamaha HTR-5460 | Owner's Manual - Page 33
    and General models only) FREQUENCY STEP Because the interstation frequency spacing FM/AM differs in different areas, set the 100KHZ an outdoor antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about the outdoor antennas. Note • Do not connect an
  • Yamaha HTR-5460 | Owner's Manual - Page 34
    there is no interference. STANDBY /ON D I G I TA L SURROUND BASS EXTENSION BASS TREBLE ON OFF -+ -+ SPEAKERS A B ON OFF D I G I TA L VOLUME EFFECT DSP PROGRAM PRESET /TUNING FM/AM MEMORY TUNING MODE EDIT PHONES S VIDEO VIDEO L AUDIO R OPTICAL MAN'L/AUTO FM AUTO/MAN'L MONO
  • Yamaha HTR-5460 | Owner's Manual - Page 35
    is stored along with the station frequency. • You can manually replace a preset station with another FM or AM station by simply following the procedure in the section "Manually presetting stations". • If the number of the received stations does not reach E8, automatic preset tuning has automatically
  • Yamaha HTR-5460 | Owner's Manual - Page 36
    which it was stored. s On the remote control 1 3 2,4 1 Tune in to a station. See "Automatic (or Manual) Tuning" for tuning instructions. 2 Press MEMORY (MAN'L/AUTO FM). The "MEMORY" indicator flashes for about 5 seconds. MEMORY MAN'L/AUTO FM MEMORY Flashes 3 Turn the multi jog knob to select
  • Yamaha HTR-5460 | Owner's Manual - Page 37
    On the front panel STANDBY /ON D I G I TA L SURROUND BASS EXTENSION BASS TREBLE ON OFF -+ -+ SPEAKERS A B ON OFF D I G I TA L VOLUME EFFECT DSP PROGRAM PRESET /TUNING FM/AM MEMORY TUNING MODE EDIT PHONES S VIDEO VIDEO L AUDIO R OPTICAL MAN'L/AUTO FM AUTO/MAN'L MONO SILENT
  • Yamaha HTR-5460 | Owner's Manual - Page 38
    operation instructions for these components. STANDBY /ON D I G I TA L SURROUND BASS EXTENSION BASS TREBLE ON OFF -+ -+ SPEAKERS A B ON OFF D I G I TA L VOLUME EFFECT DSP PROGRAM PRESET /TUNING FM/AM MEMORY TUNING MODE EDIT PHONES S VIDEO VIDEO L AUDIO R OPTICAL MAN'L/AUTO
  • Yamaha HTR-5460 | Owner's Manual - Page 39
    OUT 4C OPTICAL IN 4D COAXIAL IN 5 INPUT MODE 6 DOLBY D. SET LFE LEVEL D-RANGE 7 DTS SET 8 SP DELAY TIME 9 DISPLAY SET BLUE BACK OSD SHIFT DIMMER 10 MEMORY GUARD Adjusting the Items on the SET MENU Adjustment should be made with the remote control. 1 A/B/C/D/E 3,6 4,5 2 A/B/C/D/E Note • Some
  • Yamaha HTR-5460 | Owner's Manual - Page 40
    more than one week, the settings of the SET MENU you adjusted will return to the factory settings. If so, adjust the items again. LRG SML NONE SML Select this if you have a small center speaker. The lowfrequency signals (90 Hz and below) of the center channel are directed to the speakers selected
  • Yamaha HTR-5460 | Owner's Manual - Page 41
    range of the left and right main channel signal is directed to the left and right main speakers. 1B MAIN SP SET MENU s 1C REAR L/R SP (rear channel are directed to the main speakers even if you select SMALL for the main speaker mode. LRG SML NONE y • This unit is set in the Virtual CINEMA DSP
  • Yamaha HTR-5460 | Owner's Manual - Page 42
    SET MENU s 1D LFE/BASS OUT (bass out mode) LFE signals carry low-frequency effects when this unit decodes a Dolby Digital or DTS signal. Low-frequency signals are defined as 90 Hz and below. Choices: SWFR (subwoofer), MAIN, BOTH Initial setting channels are Control range: 10 for L/R Initial setting
  • Yamaha HTR-5460 | Owner's Manual - Page 43
    and treble when you use your headphones. Control range (dB): -6 to +3 Initial setting: 0 dB for both BASS and TRBL settings: [A] DVD [B] D-TV/CBL 4A CMPNT-V INPUT [A DVD [B D-TV/CBL SET MENU s 4C OPTICAL IN (for the OPTICAL INPUT jacks) Initial settings: (2) MD/CD-R (3) DVD (4) D-TV/CBL 4C OPTICAL
  • Yamaha HTR-5460 | Owner's Manual - Page 44
    the output level of the LFE (low-frequency effect) channel when playing back a Dolby Digital signal. The LFE signal carries the lowfrequency special effect sound which is only added to certain scenes. Control value (dB): -20 to 0 Initial setting: 0 dB Notes • Adjust the LFE level according to the
  • Yamaha HTR-5460 | Owner's Manual - Page 45
    INTRODUCTION PREPARATION BASIC OPERATION SET MENU 8 SP DELAY TIME Use this feature to adjust the delay of the center channel sound. This feature works when this unit decodes a Dolby Digital or DTS signal. Ideally, the center speaker should be the same distance from the listening position as the
  • Yamaha HTR-5460 | Owner's Manual - Page 46
    the remote control. 3 Press j / i to adjust the speaker output level. • The control range control range for the subwoofer is from 0 dB to -20 dB. 1 A/B/C/D/E 3 2 A/B/C/D/E 1 Set the selector dial to the AMP/TUN (or DSP you adjusted will return to the factory settings. If so, adjust the output
  • Yamaha HTR-5460 | Owner's Manual - Page 47
    timer also automatically turns off the external components connected to AC OUTLET(S). The sleep timer can only be set with the remote control. 4 The "SLEEP /DVR VCR 1 D-TV/CBL DVD MD/CD-R TUNER DSP CD PHONO SLEEP VOLUME Setting the Sleep Timer 2 A/B/C/D/E Canceling the Sleep Timer Press
  • Yamaha HTR-5460 | Owner's Manual - Page 48
    in the DVD/LD and DVD MENU positions. The code for a YAMAHA DVD player is factory-set. TV A TV can be controlled. Notes DSP/TUN This unit can be controlled and DSP programs can be selected directly. • The general operational buttons on the remote control differ depending on the position of
  • Yamaha HTR-5460 | Owner's Manual - Page 49
    describes the procedure for controlling a YAMAHA CD player. 1 A/B/C/D/E 5 3 4 2 6 A/B/C/D/E 1 Set the selector dial to the CD position. 2 Turn on the power. s Controlling this unit See "Remote Control". 1 STANDBY 2 POWER 3 VOLUME +/- 4 SLEEP Note • If you have set up the code for your TV and
  • Yamaha HTR-5460 | Owner's Manual - Page 50
    operation. e Pause A/B/C/D/E YAMAHA CD player (factory settings): Pause/Stop a Skip + s Stop YAMAHA CD player (factory settings): Pause/Stop f Search AV POWER This button turns on the CD player that has a remote control with a power button if you have set up the code for another manufacturer
  • Yamaha HTR-5460 | Owner's Manual - Page 51
    Numeric buttons INDEX +10 DISC SKIP -/+ Return Menu select DISPLAY A/B/C/D/E Menu up Menu left TITLE Menu right Menu down MENU AV POWER This button turns on the DVD player that has a remote control with a power button if you have set up the code for another manufacturer. • The dark-shaded
  • Yamaha HTR-5460 | Owner's Manual - Page 52
    a power button if you have set up the code for your VCR. s TV position _/_ _ CH -/+ Menu select DISPLAY/ Guide (SAT) A/B/C/D/E Menu up Menu left Menu right Recall Menu down MENU AV POWER This button turns on a cable TV/satellite tuner that has a remote control with a power button if you
  • Yamaha HTR-5460 | Owner's Manual - Page 53
    the code. 5 Press AV POWER (or any other button) to check if you have set up the code correctly. If your component cannot be controlled with the remote control, try setting another code for the same manufacturer. Notes • You can set up only one code for one position. • In the DVD/LD and DVD MENU
  • Yamaha HTR-5460 | Owner's Manual - Page 54
    REMOTE CONTROL FEATURES Returning to the Factory Setting s To return to the factory-set codes in all positions 1 Press j / i at the same time for about 4 seconds. The indicator flashes twice. s To return to the factory-set codes in each position 1 Set the selector dial to the position for the
  • Yamaha HTR-5460 | Owner's Manual - Page 55
    field processor (DSP) based on the latest YAMAHA technology is built Dolby Digital or DTS signal. If 5CH STEREO is selected, the sound is output from all speakers regardless of the input source.) CINEMA DSP the atmosphere in the stadium spread on the surround side, while their spread to the rear
  • Yamaha HTR-5460 | Owner's Manual - Page 56
    the sub-program "NORMAL" of the q/DTS SURROUND program. • If "1A CENTER SP" on the SET MENU is set to NONE, no sound is output from the center speaker. • The effect sound is output from the main speakers when a monaural source is played with CINEMA DSP program groups 4 (GAME) and 5 to 8. 52
  • Yamaha HTR-5460 | Owner's Manual - Page 57
    input source is encoded with Dolby Digital (5.1-channel) or DTS (Tri-Field CINEMA DSP) Presence DSP sound field These programs use YAMAHA's tri-field DSP processing on each of the Dolby Digital or DTS signals for the front, left surround and right surround channels. This processing enables this
  • Yamaha HTR-5460 | Owner's Manual - Page 58
    a wall. These reflections fall into specific patterns for any particular environment, and set with values precisely calculated by YAMAHA to create a sound field unique to the program. It is recommended to use DSP sound field parameters allow you to control these and many other factors that
  • Yamaha HTR-5460 | Owner's Manual - Page 59
    , it is also possible to enjoy specifically tailor the sound field program to the characteristics of the source and the acoustics of the listening room. 3 2 A/B/C/D/E 1 4 5 3 A/B/C/D/E 1 Set the selector dial to the DSP/TUN (or AMP/TUN) position. or 2 Turn on the video monitor and press ON
  • Yamaha HTR-5460 | Owner's Manual - Page 60
    seems. For a small room, this parameter would be set to a small value, for a large room, set it to a large value. Sound source First reflection the apparent size of the surround sound field. The larger the value, the larger the surround sound field becomes. Control range: 0.1 - 2.0 Description
  • Yamaha HTR-5460 | Owner's Manual - Page 61
    delay between the direct sound and the first reflection on the surround side of the sound field. You can only adjust this parameter when at least two front channels and two rear channels are used. Control range: 1 - 49 msec BASIC OPERATION ADVANCED OPERATION ADDITIONAL INFORMATION APPENDIX
  • Yamaha HTR-5460 | Owner's Manual - Page 62
    ) Function: These parameters adjust the sound delay for each channel in 5 channel stereo mode. Control range: 0 - 50 msec s LS.DELAY (left surround delay) Function: These parameters adjust the sound delay for each channel in 5 channel stereo mode. Control range: 0 - 50 msec s RS.DELAY (right
  • Yamaha HTR-5460 | Owner's Manual - Page 63
    is not listed below or if the instruction below does not help, set this unit in the standby mode, disconnect the power cord and contact the nearest authorized YAMAHA dealer or service center. s General Problem Cause Remedy Refer to page The unit fails to turn on when STANDBY/ON (or POWER) is
  • Yamaha HTR-5460 | Owner's Manual - Page 64
    when a Dolby Digital or DTS signal is being played. "1D LFE/BASS OUT" on the SET MENU is set to SWFR or MAIN when a 2-channel source is being played. The source does not contain low bass signals (90 Hz and below). "1D LFE/BASS OUT" on the SET MENU is set to SWFR or BOTH and your system does
  • Yamaha HTR-5460 | Owner's Manual - Page 65
    PREPARATION TROUBLESHOOTING Problem Cause The volume level cannot be increased, or the sound is distorted. The effect and surround sounds cannot be recorded. The component connected to the REC OUT jacks of this unit is turned off. It is not possible to record the effect and surround sounds
  • Yamaha HTR-5460 | Owner's Manual - Page 66
    TROUBLESHOOTING s Tuner Problem broadcasts may cause this problem when the transmitter is directional FM antenna. Use the manual tuning method. Adjust the antenna station is too weak. Use the manual tuning method. Use a high-quality for best reception. Use the manual tuning method. Use an outdoor
  • Yamaha HTR-5460 | Owner's Manual - Page 67
    unit. Replace all batteries with new ones. Set the selector dial to the appropriate position, corresponding to the component to be controlled. The manufacturer code has not been set up properly. Depending on the manufacturer or the model, some components cannot be controlled with this unit's remote
  • Yamaha HTR-5460 | Owner's Manual - Page 68
    , Singapore, China and General models 2 (SWITCHED) [Australia model 1 (SWITCHED) • Dimension (W x H x D 435 x 151 x 390 mm • Weight 10.5 kg • Accessories Remote Control Batteries AM loop antenna Indoor FM antenna Quick Reference Card Connection Guide * Specifications are subject to change
  • Yamaha HTR-5460 | Owner's Manual - Page 69
    it only enforces a low frequency range compared to the full-range reproduced by the other 5 channels in a Dolby Digital or DTS 5.1 channel systems. s CINEMA DSP D I G I TA L Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best felt in
  • Yamaha HTR-5460 | Owner's Manual - Page 70
    . The PCM system uses a technique for sampling the size of the analog signal per very small unit of time. Standing for "pulse code modulation", the more finely the sound level can be reproduced. s I/O assignment (SET MENU) Although component is normally connected according to jack names shown on the
  • Yamaha HTR-5460 | Owner's Manual - Page 71
    14 D Delay time 41 DISPLAY SET (SET MENU) BLUE BACK 41 DIMMER 41 OSD SHIFT 41 DOLBY D. SET (SET MENU) D-RANGE 40 LFE LEVEL 40 Dolby Digital 65 Dolby Surround (Dolby Pro Logic 65 DSP program CINEMA DSP program 51 Hi-Fi DSP program 51 DTS 65 DTS SET (SET MENU 40 Dust protection cap 12 DVD
  • Yamaha HTR-5460 | Owner's Manual - Page 72
    LIST OF MANUFACTURER CODES LISTES DES CODES FABRICANT TV A-MARK 1161 A TANDY 0941 ABEX 1151 ADMIRA 1141 ADVENTURA 1131 AIKO 1121 AIWA 1481 AKAI 0331, 1101, 1111 ALBA 0431 ALLERON 1091 AMBASSADOR
  • Yamaha HTR-5460 | Owner's Manual - Page 73
    , 1031, 1091, 1111, 1771 WATSON 1001 XOGEGO 1611, 1621, 1661, 1741, 1761 YAMAHA 0361, 1031, 1111 YOKO 1001 ZENITH 0011, 0041, 0891, 0991, 1771 ZONDA 1161 0696 PIONEER BR90 0556 PULSAR 0386 RCA DIGITAL SATELLITE SYSTEM 0396, 0406 REALISTIC 0136 REGENCY/EASTERN 0686 RUNCO 0386
  • Yamaha HTR-5460 | Owner's Manual - Page 74
    , 0362, 0512, 0672 DVD PLAYER AKAI DENON HITACHI JVC KENWOOD MAGNAVOX MITSUBISHI ONKYO PANASONIC PHILIPS PIONEER PROSCAN RCA SAMSUNG SHARP SONY TECHNICS THOMSON TOSHIBA YAMAHA ZENITH 0108 0368 0388 0168, 0348 0288 0248 0268 0128, 0248 0048 0188, 0248 0208, 0228 0308 0308 0148 0068 0028 0048 0328
  • Yamaha HTR-5460 | Owner's Manual - Page 75
    PIONEER 0034, 0044, 0064 REVOX 0354 SANSUI 0094, 0344 SHARP 0264 SHERWOOD 0334 SONY 0054, 0084, 0324 TEAC 0194, 0254 TECHNICS 0074, 0314 WARDS 0034 YAMAHA 0004, 0014, 0104, 0114, 0164, 0174, 0264 iv
  • Yamaha HTR-5460 | Owner's Manual - Page 76
    ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
  • Yamaha HTR-5460 | Owner's Manual - Page 77
    +L OUTPUT R L MAIN - R L REAR (SURROUND) - - + L CENTER * *RX-V620RDS only Video Monitor Subwoofer system Center speaker R L Rear speakers (Europe model) L Analog signal S S Video signal R V Video signal O Optical signal Signal flow V728180 RX-V620/RDS, HTR-5460 (ML)
  • Yamaha HTR-5460 | Owner's Manual - Page 78
    SET MENU STANDBY POWER VOLUME +/- SLEEP MUTE DSP program group buttons EFFECT Input selector buttons 6CH INPUT TAPE/MD (CD-R) DSP INPUT CD DSP + (MD/CD-R) s Stop f Fast forward (tape) Search (MD/CD-R) AV POWER p Play b Skip - w Search Numeric buttons INDEX +10 DISPLAY A/B/C/D/E e Pause
  • Yamaha HTR-5460 | Owner's Manual - Page 79
    AV POWER DISC SKIP -/+ Return Menu select Menu left TITLE Numeric buttons INDEX +10 DISPLAY A/B/C/D/E Menu up Menu right Menu down MENU AV POWER VCR DSP INPUT TV DSP INPUT CBL/SAT DSP _/_ _ DISPLAY/ Guide (SAT) A/B/C/D/E Menu up Menu right Menu down MENU AV POWER *1 Press this
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
HTR-5460
Natural Sound AV Receiver
Ampli-tuner audio-vidéo
U C A
OWNER’S MANUAL
MODE D’EMPLOI