Yamaha HTR-5460 Owner's Manual - Page 44

SET MENU 6 DOLBY D. SET (Dolby Digital set) This setting is effective only when this unit decodes Dolby Digital signals. MAX Dialog level Output level 6 DOLBY D. SET LFE LEVEL 0dB D-RANGE • • • MAX STD MIN -/+ : Adjust / : Select Input level STD MIN H-LEVEL CUT Dialog 0.0 level 1.0 Dialog level Output level Output level s LFE LEVEL Use this feature to adjust the output level of the LFE (low-frequency effect) channel when playing back a Dolby Digital signal. The LFE signal carries the lowfrequency special effect sound which is only added to certain scenes. Control value (dB): -20 to 0 Initial setting: 0 dB Notes • Adjust the LFE level according to the capacity of your subwoofer. • Normally, around -6 dB to -8 dB is most suitable for listening at home. s D-RANGE (dynamic range) Use this feature to adjust the dynamic range (the difference between the maximum level and the minimum level of sounds). Choices: MAX, STD (standard), MIN Initial setting: MAX • Select MAX for feature films. • Select STD for general use. • Select MIN for listening to sources at an extremely low volume level. 1.0 0.0 L-LEVEL BST Input level Input level Note • When you select MIN, the sound output may be faint because some Dolby Digital signals are not compatible with the minimum-level dynamic range. In this case, select MAX or STD. 7 DTS SET (DTS LFE level) This setting is effective only when this unit decodes DTS signals. Use this feature to adjust the output level of the LFE (low-frequency effect) channel when playing back a DTS signal. The LFE signal carries the low-frequency special effect sound which is only added to certain scenes. Control range (dB): -10 to +10 Initial setting: 0 dB 7 DTS SET LFE LEVEL 0dB -/+ : Adjust / : Exit Note • Adjust the LFE level according to the capacity of your subwoofer. 40