Yamaha HTR-5460 Owner's Manual - Page 9

INTRODUCTION PREPARATION 8 BASS Adjusts the low-frequency response for the left and right main speakers. Turn the control to the right to increase or to the left to decrease the low-frequency response. 9 TREBLE Adjusts the high-frequency response for the left and right main speakers. Turn the control to the right to increase or to the left to decrease the high-frequency response. Note • If you increase or decrease the high-frequency or the lowfrequency sound to an extreme level, the tonal quality from the center and rear speakers may not match that of the left and right main speakers. 0 SPEAKERS A/B When pushed in (ON), these buttons turn on the set of main speakers connected to the A and/or B terminals on the rear panel. q EFFECT Switches the effect speakers (center and rear) on and off. If you turn off the output of these speakers by using EFFECT, all Dolby Digital and DTS audio signals except for the LFE channel are directed to the main left and right channels. When Dolby Digital or DTS signals are mixed, the left and right main channel signal levels may not match. w DSP PROGRAM Switches the function of the multi jog knob for selecting DSP program. e PHONES jack Outputs audio signals for private listening with headphones. When you connect headphones, no signals are output to the speakers. CONTROLS AND FUNCTIONS r Multi jog knob Selects the tuning frequency in the tuning mode. Selects the preset station after pressing PRESET/ TUNING (EDIT) to display " z " in the tuning mode. Selects the DSP program after pressing DSP PROGRAM. t VIDEO AUX jacks Inputs audio and video signals from a portable external source such as a game console. To reproduce source signals from these jacks, select V-AUX as the input source. y PRESET/TUNING (EDIT) Switches the function of the multi jog knob between selecting a preset station number and tuning. This button is also used to exchange the assignment of two preset stations with each other. u FM/AM Switches the reception band between FM and AM. i MEMORY (MAN'L/AUTO FM) Stores a station in the memory. Hold down this button for more than 3 seconds to start automatic preset tuning (for FM stations only). o TUNING MODE (AUTO/MAN'L MONO) Switches the tuning mode between automatic and manual. To select the automatic tuning mode, press this button so that the "AUTO" indicator lights up on the front panel display again. To select the manual tuning mode, press this button so that the "AUTO" indicator does not light up. p INPUT l / h Selects the input source (CD, TUNER, MD/CD-R, DVD, D-TV/CBL, VCR 1, PHONO, V-AUX, VCR 2/DVR) you want to listen to or watch. BASIC OPERAIONT ADVANCED OPERATION ADDITIONAL INFORMATION APPENDIX English 5