Yamaha MT4X Owner's Manual - Page 35
Rehearsal, Recording, Check the recording
View all Yamaha MT4X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
33 Recording Functions Rehearsal 5) Press the PLAY key to start playback. 6) Adjust the channel levels with the channel faders. Set the equalization with the HIGH, MID, and LOW equalizer controls (2). Use the Pan control to adjust the pan position. Set the aux send level with the AUX SEND controls (3). Adjust the auxiliary return levels with the LEVEL controls (9). Set the levels and other parameters of any connected signal processing equipment. Adjust the record levels on the master recorder. 7) When you are satisfied with the levels, press the RETURN TO ZERO key to stop the rehearsal and rewind the tape. Recording 8) Insert a tape into the master recorder. 9) Start recording on the master recorder. Press the PLAY key on the MT4X to start playback. Note: You may want to remove any count-ins before you create your master tape. There are several ways of doing this. One method is to switch (input select key) the track that contains the count-in to the MIC/ LINE position until the count is completed and then switch it to the TAPE. Another method is to set the MT4X to start playback after the count-in. Use the method that you find most comfortable. Check the recording 10) When the recording is finished, rewind the master recorder and play back the tape. Tip: You can add a synchronized MIDI part to your mix. See "Synchronized mixdown" on page 39. User's Guide