Yamaha MT4X Owner's Manual - Page 39
Connections and setup, Rehearsal
View all Yamaha MT4X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
37 Synchronization Connections and setup 1) Plug a compatible cable from the TAPE OUT - SYNC/4 (k) connector into the MIDI/FSK input on your sequencer, rhythm machine, or converter. Set the connected MIDI instrument to FSK sync mode, to receive the FSK signals from the MT4X. Set any other connected MIDI instruments to MIDI clock mode to slave to the MIDI device receiving the FSK signals. Perform any other required setup on your MIDI instruments to ensure they perform correctly once the MT4X starts playing the FSK signals. Please refer to the instruction manual supplied with your MIDI instrument for further setup details. 2) Connect your MIDI instrument(s) to a monitor mixer. Then connect the input source for each channel to the corresponding MIC/LINE INPUT connector. Monitor signal Synthesizer Sequencer Rhythm Programmer MIDI IN MIDI OUT MIDI IN MIDI OUT MIDI IN Monitor Mixer MIDI OUT TAPE SYNC IN FSK Signal MIC/LINE TAPE OUT 1 SYNC/4 Track 1 Track 2 Track 3 Track 4 MIDI Converter (MIDI Master) Overdub track FSK track Adjust the input and monitor levels. See "Overdubbing" on page 19. Tip: You may find it easier to have just one monitor channel to adjust. Plug a cable between the MONITOR OUT connectors and the input channels of the monitor mixer. 3) Press the REC SELECT keys for the tracks you want to record. The corresponding REC SELECT - TRACK indicator on the display will flash. 4) If dbx™ system is on, press the SYNC key. The SYNC indicator will light. Rehearsal 5) Press the REHE key to put the MT4X into rehearsal mode. 6) Press the PLAY key to start playback. User's Guide