Yamaha RX-V4A RX-V4A User Guide - Page 258
No sound is coming from a specific speaker, The volume of the speaker is set too low.
View all Yamaha RX-V4A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 258 highlights
TROUBLESHOOTING > When any problem appears No sound is coming from a specific speaker ( The playback source does not contain a signal for the channel. To check it, display information about the current audio signal on the TV. For details, see the following: ( "Checking the audio signal information" (p.141) ( The currently selected sound program/decoder does not use the speaker. To check it, use "Test Tone" in the "Setup" menu. For details, see the following: ( "Outputting test tones" (p.171) ( Audio output of the speaker is disabled. Perform YPAO or use "Configuration" in the "Setup" menu to change the speaker settings. For details, see the following: ( "Flow of the speaker configurations" (p.72) ( "Setting the use of a subwoofer" (p.161) ( "Setting the use of each speaker and its size" (p.162) ( The volume of the speaker is set too low. Perform YPAO or use "Level" in the "Setup" menu to adjust the speaker volume. For details, see the following: ( "Flow of the speaker configurations" (p.72) ( "Adjusting the volume of each speaker" (p.168) ( The speaker cable connecting the unit and the speaker is broken. Check the unit's SPEAKERS terminals and the speaker's terminals. If there is no problem with the connection, replace a broken speaker cable with another speaker cable. ( The speaker is malfunctioning. To check it, replace with another speaker. If the problem persists with using another speaker, the unit may be malfunctioning. 258